John Stark Associates

This page shows some of the journal articles, technical reports, books and theses citing "Product Lifecycle Management: 21st Century Paradigm for Product Realisation", the most frequently cited publication about PLM.

1. M. Hille, F. Bodendorf (University of Erlangen-Nuremberg, Germany); Smart Services in der Baubranche Details
2. L. Schweiger, L. Barth, J. Meierhofer (Zurich University of Applied Sciences, Winterthur, Switzerland); Data Resources to Create Digital Twins Details
3. M. Erdogan (Duzce University, Turkey), O. Bilisik (Yildiz Technical University, Turkey); Prioritizing the Factors for Customer-Oriented New Product Design in Industry 4.0 Details
4. P. Gobo (EAESP FGV, São Paulo, Brazil); Um modelo de maturidade da indústria 4.0 aplicado na cadeia de suprimentos Details
5. Y. Xin, V. Ojanen, J. Huiskonen (LUT University, Lappeenranta, Finland); Sharing and reusing knowledge for innovation and competitiveness in PSS Details
6. T. Sibalija, S. Zivkovic (Belgrade Metropolitan University, Serbia); On the virtual optimization of CAI-CAx loop based on the digital twin: sculpture surface demonstrator Details
7. P. Bouvier-Patron (Université de Toulon, France); Stratégies d'Entreprises et Innovation Frugale Environnementale: Proposition d'une Matrice Stratégique Details
8. M. Schneider (Karlsruher Instituts für Technologie, Germany); Methodik für Wissens-und Prozessmanagement bei der interaktiven kollaborativen Montage variantenreicher Produkte Details
9. P. Steck, F. Nyffenegger, R. Hänggi (Hochschule für Technik, Rapperswil, Switzerland), H. Vogt (Zürcher Hochschule für Angewandte Wissenschaften, Winterthur, Switzerland); Cross industrial PLM benchmarking using maturity models Details
10. J. Davim (University of Aveiro, Portugal); Manufacturing in Digital Industries: Prospects for Industry 4.0 Details
11. A. Premrl (GEA College, Ljubljana, Slovenia); Poslovni načrt: Konjeniški center Details
12. K. Kulshrestha (Jiwaji University, Gwalior, India), S. Gupta (MLB Govt. College of Excellence, Gwalior, India) ; An Empirical Study of Determinants towards Customer Satisfaction in Major Indian Telecom Companies Details
13. T. Boyko (Bauman Moscow State Technical University, Russia); Analysis of the main trends in the development of PLM systems Details
14. M. Paavel, K. Karjust, J. Majak (Tallinn University of Technology, Estonia); Development of a product lifecycle management model based on the fuzzy analytic hierarchy process Details
15. A. Haider (Capital University of Science and Technology, Islamabad, Pakistan); Antecedents and Outcomes of Perceived Brand Authenticity: A Study of Sustainable Brands Details
16. G. Bruno, A. Faveto, E. Traini (Politecnico di Torino, Italy); An open source framework for the storage and reuse of industrial knowledge through the integration of PLM and MES Details
17. E. Mzena (Mzumbe University, Morogoro, Tanzania); The Impact of Advertising in Improving Sales Volume of a New Product: A Case of Nhif-Toto Afya Card Details
18. S. Bukantaitė (Kaunas University of Technology, Lithuania); Factors of Smart Production Processes Modernization Details
19. J. Siltanen (Lappeenranta-Lahti University of Technology, Finland); MRO company's material- and information process in the current state and how to improve it Details
20. S. Yerpude (Symbiosis Centre of Innovation and Research, India), T. Singhal (Symbiosis Centre for Management Studies, Noida, India); Value Enablement of Collaborative Supply Chain Environment Embedded With the Internet of Things: Empirical Evidence From the Automotive Industry in India Details
21. E. Lou, A. Lee, J. Goulding (University of Salford, UK); E-readiness in construction (ERiC): self-assessment Details
22. B. MacCarthy, R. Pasley (Nottingham University Business School, UK); Group decision support for product lifecycle management Details
23. O. Olawale, L. Oyedele, H. Owolabi, A. Gbadamosi, H. Kusimo (University of the West of England, Bristol, UK); Project reputation in construction: a process-based perspective of construction practitioners in the UK Details
24. J. Vizuete (University of Cincinnati, USA); IIoT based Augmented Reality for Factory Data Collection and Visualization Details
25. L. Li, Y. Wang, K. Lin (Tongji University, Shanghai, China); Preventive maintenance scheduling optimization based on opportunistic production-maintenance synchronization Details
26. J. Heihoff-Schwede, L. Kaiser, R. Dumitrescu (Fraunhofer IEM, Germany) ; An MBSE-based approach for the definition and evaluation of Engineering IT architectures Details
27. S. Schleibaum, J. Mueller (Technische Universität Clausthal, Germany), S. Kehl, P. Stiefel (Volkswagen AG, Germany); Towards automated classification of product data based on machinelearning Details
28. R. Castaneda (Roche Diabetes Care, Germany), E. Ostrosi, J.-C. Sagot (Université Bourgogne Franche-Comté, France), T. Majic (Croatian Academy of Sciences and Arts in Diaspora and Homeland, Switzerland), J. Stjepandic (PROSTEP AG, Germany); A method to explore product risk in product lifecycle management of configured products Details
29. I. Grässler, J. Pottebaum (Paderborn University, Germany); Immersive Abstraction: A new morphology of intuitive interaction with system models Details
30. I. Ikonen (Häme University of Applied Sciences, Riihimäki, Finland); Implementation of CAD-software Details
31. J. Qian (Hangzhou Normal University, China), R. Law (Hong Kong Polytechnic University, Hong Kong), J. Wei (Zhejiang Business College, Hangzhou, China), H. Shen (City University of Macau, Macau), Y. Sun (Shanghai Business School, Shanghai, China); Hotels' self-positioned image versus customers' perceived image: a case study of a boutique luxury hotel in Hong Kong Details
32. S. Raza (Sultan Qaboos University, Muscat, Oman); A systematic literature review of closed-loop supply chains Details
33. H. Qin, Y. Zhang (Guangdong Institute of Intelligent Manufacturing?China), J. Jin (Swinburne University of Technology, Melbourne, Australia), S. Hu (Kunming University of Science and Technology, China); Intelligent Design Based on Knowledge Capture and Reuse Details
34. A. Corallo, M. Latino, M. Menegoli (University of Salento, Lecce, Italy), P. Pontrandolfo (Polytechnic of Bari, Bari, Italy); A systematic literature review to explore traceability and lifecycle relationship Details
35. J. Salmi (Metropolia University of Applied Sciences, Helsinki, Finland); Developing Item Policy to Enhance Proprietary Item Data Quality Details
36. A. Limmeri (Seinäjoki University of Applied Sciences, Finland); PLM Software suite during new product introduction Details
37. J. Takkunen (Centria University of Applied Sciences, Kokkola, Finland); Introduction of a product data management system Details
38. A. Buda, A. Jarynowski, K. Kuzmicz (Glogow, Poland); An attempt to unified approach to the evolution of products in the entertainment industry Details
39. H. Halttula (University of Oulu, Finland); Enhancing data utilisation in the construction project lifecycle through early involvement and integration Details
40. M. Leppäniemi (JAMK University of Applied Sciences, Jyväskylä, Finland); Creating a bill of materials for a shoe press roll in a PLM environment Details
41. N. Brandt, F. Ahlemann (University of Duisburg-Essen, Germany); How do you drive? Connected vehicles to innovate product lifecycles Details
42. P. Kruse (Universidade Estadual de Campinas, Brazil); Proposal for an economic production lot review for an industry in the health, hygiene and beauty segment Details
43. J. Conlon (The University of Manchester, Manchester, UK); From PLM 1.0 to PLM 2.0: the evolving role of product lifecycle management (PLM) in the textile and apparel industries Details
44. R. Vengatesan (Politecnico di Torino, Italy); Analysis of Product and Process Design According to Industrial V 4.0 Perspective Details
45. I. Gehrke, M. Schauss, T. Gries (RWTH Aachen University, Germany); Experiencing the potential of closed-loop PLM systems enabled by Industrial Internet of Things Details
46. T. Erik (Moscow Aviation Institute, Russia), Y. Yin (Shanghai Jiao Tong University, China); Optimization of vertical stabilizer structure diagram Details
47. C. Achillas (International Hellenic University, Katerini, Greece), C. Vlachokostas (Aristotle University, Thessaloniki, Greece), C. Koroneos (University of Western Macedonia, Kozani, Greece); Life cycle thinking: towards the sustainable management of resources in aluminium production Details
48. G. Aid (Ragn-Sells Group, Sweden), D. Lazarevic (Finnish Environment Institute SYKE, Finland); From Waste Management to Natural Capital Management in the Circular Economy Details
49. G. Kim, J. Hwang (Seoul National University, South Korea); R and D Partner Type, Product Lifecycle, and Innovation Performance of High-technology Ventures Details
50. M. Riesener, C. Dolle, C. Mattern, J. Kress (RWTH Aachen University, Germany); Circular Economy: Challenges and Potentials for the Manufacturing Industry by Digital Transformation Details
51. H. Wojciechowski, L. Hadas, F. Karaskiewicz (Poznan University of Technology, Poland); Identification and characteristic of necessary tasks in implementing engineering changes in automotive industry Details
52. A. Bravo (University of Minho, Portugal); Sistema U-TRACE para rastreabilidade do produto Details
53. M. Fahmideh (University of Wollongong, Australia) , G. Beydoun (University of Technology Sydney, Australia); Big data analytics architecture design Details
54. A. Benabdellah, I. Bouhaddou, (ENSAM, Moulay Ismail University, Meknes, Morocco), A. Benghabrit (ENSMR, Mohamed V University, Rabat, Morocco), O. Benghabrit (Faurecia, Meru, France); Design for relevance concurrent engineering approach: integration of IATF 16949 requirements and design for X techniques Details
55. M. Kambanou (Linkoping University, Sweden); Life Cycle Costing: Understanding How It Is Practised and Its Relationship to Life Cycle Management - A Case Study Details
56. D. Seven (Middle East Technical University, Ankara, Turkey); CM2-Based Physical Item Hierarchy Implementation for a Product Lifecycle Management System Details
57. M. Tripaldi (Politecnico di Torino, Italy); Evaluating PLM Implementation in a Medium Enterprise - The cuboGas Case Study Details
58. R. Alhashimi (University of Huddersfield, England); Economics and Theoretical Underpinning of Firm Structure and Market Competition Details
59. J. Ribeiro (Universidade PUC Minas, Brasil), F. Ziviani (Universidade FUMEC, Brasil), F. Correa (Universidade UFSJ, Brasil), R. Franca (Universidade UEMG, Brasil), F. Zaidan (IETEC, Brasil); Tecnologias de informacao e gestao do conhecimento na industria 4.0 Details
60. A. Karkasinas, A. Rentizelas (Strathclyde University, Glasgow, Scotland); Verification and validation: a novel product lifecycle management-based approach Details
61. S. Hirosaki (Japan); Low-priced price strategy in original pharmaceutical companies Details
62. H. Ciftci (Hasan Kalyoncu University, Gaziantep, Turkey); Investigation of feasibility for Gaziantep earthquake master plan Details
63. S. Huopio (Finnish Defence Research Agency, Finland); A Quest for Indicators of Security Debt Details
64. D. Anderson, R. Cronk, L. Best, M. Radin, H. Schram, J. Tracy, J. Bartram (University of North Carolina, Chapel Hill, USA); Budgeting for Environmental Health Services in Healthcare Facilities: A Ten-Step Model for Planning and Costing Details
65. N. Abdelghafar, M. El-Sharief (Assiut University, Egypt); The Use of Industry 4.0 Concepts in the Retailing Process of the Automotive Industry Details
66. D. Gross, A. McCommon (University of Arizona, Tucson, USA); Seeking Research and Education Value in Agile Academic LabsSeeking Research and Education Value in Agile Academic Labs Details
67. F. Martunus (Universitas Islam Negeri Syarif Hidayatullah Jakarta, Indonesia); Implementasi face recognition dengan opencv pada "smart CCTV" untuk keamanan brankas berbasis IoT Details
68. S. Bodi (Technical University of Cluj-Napoca, Romania); Virtual quality management in the era of industry 4.0 Details
69. M. Kichigina (Voronezh State Technical University, Russia); Development of a data model editor to support the product lifecycle system Details
70. D. Jones, C. Snider, A. Nassehi, J. Yon, B. Hicks (University of Bristol, UK); Characterising the Digital Twin: A systematic literature review Details
71. T. Ngo, P. Dang, N. Vo, H. Le, L. Do, L. Doan (University of Danang, Viet Nam); Towards an Effective Solution for Medical Treatment Process based on Product Lifecycle Management Details
72. N. Milchakova, L. Reshetnikov (University of Tyumen, Tyumen, Russia); An Evolutionary Model of the Product Life Cycle: the Peculiarities of Adaptation Details
73. J. Närhi (Tampere University, Finland); Modular product in a PLM system Details
74. M. Heinrichsmeyer, N. Schlüter, A. Ansari (University of Wuppertal, Germany); Algorithm-Based Handling of Complaints Data from the Usage Phase Details
75. H. Halttula (Topcon Technology Finland Oy, Espoo, Finland), H. Haapasalo (University of Oulu, Finland), R. Silvola (Konecranes, Finland); Managing data flows in infrastructure projects - the lifecycle process model Details
76. N. Kovaleva (Moscow Timiryazev Agricultural Academy, Moscow, Russia); The features of application of ABC system in cost management at the enterprise of the food industry Details
77. S. Goto, O. Yoshie, S. Fujimura (Waseda University, Fukuoka, Japan); Empirical Study of Multi-party Workshop Facilitation in Strategy Planning Phase for Product Lifecycle Management System Details
78. D. Oliveira, M. Gardoni, (École de Technologie Supérieure, Montreal, Canada), K. Dalkir (McGill University, Montreal, Canada); Tracking the Capture of Tacit Knowledge in Product Lifecycle Management Implementation Details
79. B. Koomen, M. Hoogeboom (University of Twente, Enschede, The Netherlands), V. Schellens (Avans University of Applied Science, Tilburg, The Netherlands); PLM Implementation Success Rate in SME. An Empirical Study of Implementation Projects, Preliminary Findings Details
80. S. Peters, G. McSorley (University of Prince Edward Island, Charlottetown, Canada), C. Fortin (Skoltech, Skolkovo Innovation Center, Moscow, Russia); A Novel Approach to Product Lifecycle Management and Engineering Using Behavioural Models for the Conceptual Design Phase Details
81. B. Succar (ChangeAgents AEC, Australia), E. Poirier (ETS, Montreal, Quebec, Canada); Lifecycle information transformation and exchange for delivering and managing digital and physical assets Details
82. C. Pahins, F. D'Morison, T. Rocha, L. Almeida, A. Batista, D. Souza (Sidia - Institute of Science and Technology, Manaus, Brazil); T-REC: Towards Accurate Bug Triage for Technical Groups Details
83. S. Huang, G. Wang, Y. Yan (Beijing Institute of Technology, Beijing, China), X. Fang (China Ship Development and Design Center, Wuhan, Hubei, China); Blockchain-based data management for digital twin of product Details
84. M. Ollila (University of Oulu, Finland); Creating architecture for a digital information system leveraging virtual environments Details
85. J. Heihoff-Schwede, L. Bretz, L. Kaiser, R. Dumitrescu (Fraunhofer IEM, Paderborn, Germany); An explanatory model as basis for the introduction of systems engineering and capable IT-infrastructures in industry Details
86. J. Heihoff-Schwede, L. Kaiser, R. Dumitrescu (Fraunhofer IEM, Paderborn, Germany); An MBSE-based approach for the analysis of requirements towards engineering IT architectures Details
87. S. Otten, T. Glock, C. Hohl, E. Sax (FZI Research Center for Information Technology, Karlsruhe, Germany); Model-based Variant Management in Automotive Systems Engineering Details
88. O. Varhan (Izmir Institute of Technology, Turkey); Economic Contributions and Collaborative Benefits of PLM (Product Lifecycle Management) to Organizations Details
89. J. Strassl (Ostbayerische Technische Hochschule Amberg-Weiden, Germany), G. Schicker (Institut für systemisches Management und Organisation ISMO GmbH, Weiherhammer, Germany); Digitale Strategien entwickeln - von der Idee zur Roadmap Details
90. L. Styger, M. Edwards, L. Richardson (University of Wollongong, Sydney, Australia), K. Chiang (Torrens University, Sydney, Australia); Navigating the Double Death Valley Curve of New Product Introduction and Successful Product Lifecycle Management - A Longitudinal Study into Product Development Strategy in Regulated Australian Grass Roots Suppliers Details
91. K. Gorkovenko, D. Murray-Rust (University of Edinburgh, UK) D. Burnett, J. Thorp, D. Richards (Lancaster University, UK); Exploring the future of data-driven product design Details
92. J. Conlon (University of Huddersfield, UK); A Learning Architecture: How Product Lifecycle Management (PLM) Drives Innovation in The Curriculum and Pedagogy of Fashion Business Details
93. B. Flygansvaer, R. Dahlstrom (BI Norwegian Business School, Oslo, Norway), A. Nygaard (Kristiania University College, Oslo, Norway); Green innovation in recycling - a preliminary analysis of reversed logistics in Norway Details
94. D. Sun, Z. Feng, Y. Wang, T. Pong, H. Qu ((Hong Kong University of Science and Technology), Y. Chen, J. Zeng, M. Yuan (Noah's Ark Lab, Huawei Technologies Co. Ltd.); DFSeer: A Visual Analytics Approach to Facilitate Model Selection for Demand Forecasting Details
95. H. Wache, B. Dinter (Chemnitz University of Technology, Germany); The Digital Twin - Birth of an Integrated System in the Digital Age Details
96. L. Horváth (Óbuda University, Budapest, Hungary); Smart Engineering Modeling for Smart Industrial Products Details
97. I. Luosa (Tampere University, Finland); Development of productized service life cycle model for medical devices Details
98. S. Bahrami, B. Atkin, A. Landin (Lund University, Sweden); Enabling the diffusion of sustainable product innovations in BIM library platforms Details
99. D. Bilgeri (ETH Zurich, Switzerland); The impact of IoT on specific business model elements - Insights from multibusiness manufacturing companies Details
100. H. Hannila, A. Tolonen, J. Harkonen, H. Haapasalo (University of Oulu, Finland); Product and supply chain related data, processes and information systems for product portfolio management Details
101. S. Hiller, P. Weber, H. Lasi (Ferdinand-Steinbeis Institute of the Steinbeis-Foundation, Germany), H. Rust (Karlsruhe University of Applied Sciences, Germany); Identifying Business Potentials of Additive Manufacturing as Part of Digital Value Creation in SMEs - An Explorative Case Study Details
102. J. Harkonen, E. Mustonen, H. Haapasalo (University of Oulu, Finland); Construction-Related Data Management: Classification and Description of Data from Different Perspectives Details
103. A. Stekolschik (Cologne University of Applied Sciences, Cologne, Germany); Approach to structure management and customer-related configuration in the product lifecycle in mechanical engineering Details
104. L. Askew, A. Desai (Georgia Southern University, Statesboro, Georgia, USA); Green and Environment Conscious Manufacturing and Management Techniques Details
105. A. Moradeyo (Augustine University, Lagos, Nigeria); Analysis of Manufacturing Methods Using Market Demand Dynamics Details

1. F. Erten (Maltepe University, Istanbul, Turkey); A four-dimensional model proposal for the management of concurrent engineering projects Details
2. G. Granlund (Novia University of Applied Sciences, Vaasa, Finland); Product Lifecycle Management with W2X Details
3. M. Akbari (University of Tehran, Iran), M. Asadpour (University of Tarbiat Modares, Tehran, Iran), M. Karimian-Ravandi, S. Koupaei (University of Tehran, Qom, Iran); Identifying the Difficulties of Horticultural Product Distribution Channels (Case study: The Central Fruit and Vegetable Organization of Tehran Province) Details
4. N. Aeknarajindawat (Suan Sunandha Rajabhat University, Bangkok, Thailand), K. Jermsittiparsert (Chulalongkorn University, Bangkok, Thailand); The mediating role of green creativity in the relationship between proactive green innovation, reactive green innovation and the performance of Green product development: A case of Thai sports manufacturing firms Details
5. K. Haas (Karlsruher Instituts für Technologie, Germany); Digitales Assistenzsystem für das Product Lifecycle Management Details
6. V. Babica, D. Sceulovs (Riga Technical University, Latvia); Public Procurement of Innovation: Selection of the Sustainable Alternative Details
7. O. Markakis (National Technical University of Athens, Greece); Decision Support Framework for the Evaluation and Promotion of Dynamic Enterprise Networks Details
8. W-L. Tsai, Y-C. Chan (Oriental Institute of Technology, New Taipei City, Taiwan); An Approach for Determining the Impact of Digital Content Product Design Details
9. A. Oran (University of Jordan, Amman, Jordan); Fashion's Effect on Consumer's Preference Formation Details
10. N. Järnström (Novia University of Applied Sciences, Vaasa, Finland); Product Structure and Information as a Common Model; A manufacturing company case study Details
11. P. Helle, A. Mitschke, G. Schramm (Airbus Central R&T, Hamburg, Germany), S. Feo-Arenis (Airbus Central R&T, Munich, Germany); Smart Component Modeling for Complex System Development Details
12. C. Palomino (University of Oulu, Finland); Stakeholders of Product Management in Case Companies Details
13. X. Liu, W. Wang, H. Guo, A. Barenji, Z. Li (Guangdong University of Technology, Guangzhou, China), G.Huang (University of Hong Kong); Industrial blockchain based framework for product lifecycle management in industry 4.0 Details
14. L. Kathrein, K. Meixner, D. Winkler, S. Biffl (Technische Universität Wien, Austria), A. Lüder (Otto-von-Guericke University of Magdeburg, Germany); Process analysis for communicating systems engineering workgroups Details
15. R. Nardone, U. Gentile, M. Benerecetti, N. Mazzocca, A. Peron, V. Vittorini (Università di Napoli Federico II, DIETI, Napoli, Italy), S. Marrone (Università della Campania Luigi Vanvitelli, DMF, Caserta, Italy), A. Amato, G. Barberio, G. Pisani (Mate Consulting s.r.l., Salerno, Italy), R. De Guglielmo, L. Velardi (Hitachi Rail STS, Napoli, Italy), B. Di Martino (Università della Campania Luigi Vanvitelli, DIII, Aversa, Italy); An OSLC-based environment for system-level functional testing of ERTMS/ETCS controllers Details
16. N. Simola (Tampere University, Finland); Developing traceability of in-house components in manufacturing industry Details
17. K. Hong Lim, P. Zheng, C-H. Chen (Nanyang Technological University, Singapore); A state-of-the-art survey of Digital Twin: techniques, engineering product lifecycle management and business innovation perspectives Details
18. S. Miljuchenko, K. Kashirtsev, A. Nesterenko, T. Nichushkina (Bauman Moscow State Technical University, Russia), O. Ilek, A. Sgonnikov, S. Kaznacheev (JSC Military-industrial corporation NPO Mashinostroenia, Reutov, Russia); Structure analysis and work results of the mathematical simulation stands for the rocket and space technology control systems development Details
19. Y-S. Jang (Korea Polytechnic, South Korea); A Study on Software Security Vulnerability Detection Using Coding Standard Searching Technique Details
20. S. Bahrami, B. Atkin, A. Landin (Lund University, Sweden); Innovation diffusion through standardization: A study of building ventilation products Details
21. R. Carreño Morales (Universidade de Vigo, Spain); Modelado de la incertidumbre en los procesos de diseño Details
22. E. Balantinaki (Technological Institute of Crete, Heraklion, Greece); Factors influencing the virality of a product or service on social media Details
23. L. Kathrein, K. Meixner, D. Winkler, S. Biffl (Technische Universität Wien, Austria), A. Lüder (Otto-von-Guericke University of Magdeburg, Germany); Product/ion-Aware Analysis of Collaborative Systems Engineering Processes Details
24. A. Eren (Kahramanmaras Sutcu Imam University, Turkey); Advanced Manufacturing Technology (AMT): A Literature Review Details
25. M. Kabir (North York, ON, Canada); Knowledge-Based Social Entrepreneurship - Understanding Knowledge Economy, Innovation, and the Future of Social Entrepreneurship Details
26. L. Kathrein, K. Meixner, D. Winkler, S. Biffl (Technische Universität Wien, Austria), A. Lüder (Otto-von-Guericke University of Magdeburg, Germany); Extending the Formal Process Description towards Consistency in Product/ion-Aware Modeling Details
27. M. Peruzzini (University of Modena and Reggio Emilia, Modena, Italy), S. Wiesner (BIBA University, Bremen, Germany); Emergence of Product-Service Systems Details
28. L. Kathrein, K. Meixner, D. Winkler, S. Biffl (Technische Universität Wien, Austria), A. Lüder (Otto-von-Guericke University of Magdeburg, Germany); Production-Aware Analysis of Multi-disciplinary Systems Engineering Processes Details
29. S. Huopio (Finnish Defence Research Agency, Riihimäki, Finland); Thou shalt not fail - Targeting Lifecycle-Long Robustness while being vigilant for the Black Swans Details
30. K. Poppe, E. Poppe (Sustainum Institut, Berlin, Germany); Product Lifecycle Management als Strategie gegen vorzeitige Obsoleszenz Details
31. M. Freitag (Fraunhofer Institute, Stuttgart, Germany), S. Wiesner (BIBA, Bremen, Germany); Smart Service Lifecycle Management - Rahmenkonzept und Anwendungsfall Details
32. K. Kowalski (Land Forces Military University, Wroclaw, Poland); Weapon Systems Life Cycle Menagement - Modernization Details
33. C. Vering, P. Mehrfeld, M. Nürenberg, M. Lauster, D. Müller (Institute for Energy Efficient Buildings and Indoor Climate, Aachen, Germany), D. Coakly (Mitsubishi Electric, Edinburgh, Scotland); Unlocking Potentials of Building Energy Systems' Operational Efficiency: Application of Digital Twin Design for HVAC systems Details
34. J. Korhonen, E. Stensson (Orebro University, Sweden); Analysis of interface between Mechanics and ILS at Saab Dynamics Details
35. A. Ezra, A. Gerald, A. Asiimwe, T. Mark, A. Freddrick (Makerere University, Kampala, Uganda); Product Lifecycle Management: effectively managing production data Details
36. M. Naoum, O. El Hichami, M. Al Achhab, B. El Mohajir (Abdelmalek Essaadi University, Tetouan, Morocco); Hypercube Graph Decomposition for Boolean Simplification: An Optimization of Business Process Verification Details
37. R. Cachay, J. Misme, L. Agurto, P. Sotomayor (Pontifical Catholic University of Peru, Lima, Peru); Improvement Proposal for Increasing Sales of the Calessi company Details
38. H. Hannila, J. Koskinen, J. Harkonen, H. Haapasalo (University of Oulu, Finland); Product-level profitability Details
39. P. Torres-Palacio (University of St. Thomas, Houston, USA); The reduction of production lead time using holonic manufacturing: experiment and analysis Details
40. M. Holler (University of St.Gallen, Switzerland); Understanding Product Lifecycle Management in Manufacturing Industries Details
41. M. Alsamydai (Al-Zaytoonah University, Amman, Jordan); Marketing Engineering and Making Marketing Decisions Details
42. S. Singh, S. Misra (Indian Institute of Technology, Kanpur, India), S. Kumar (University of St. Thomas, Minneapolis, USA); Identification and Ranking of the Risk Factors Involved in PLM Implementation Details
43. W. Wei, M. Rana (Asia Pacific University of Technology & Innovation, Kuala Lumpur, Malaysia); Software Project Schedule Management Using Machine Learning & Data Mining Details
44. C. Haar, E. Buchmann (Hochschule für Telekommunikation in Leipzig, Germany); FANE: A Firewall Appliance for the Smart Home Details
45. J. Tiedeken (Ulm University, Germany); Integration heterogener Produktdaten in verteilten, komplexen Entwicklungsprozessen Details
46. T. Apsner (University of Ljubljana, Slovenia); Development of an innovative gadget for sport fans Details
47. J. Oksanen (Tampere University, Finland); The use of Design Structure Matrix over the product's lifecycle Details
48. E. Chun, J. Han, E. Ko (Yonsei University, Seoul, Korea); Applying PLM Approach for Sustainable New Product Development in Fashion Industry Details
49. S. Molina Casino (Universitat Politècnica de València, Spain); Planificación y desarrollo del proceso de fabricación y ensamblaje de aeronaves integrado en plataformas PLM Details
50. A. Sibghatullah, M. Shamshir (Greenwich University, Karachi, Pakistan), K. Siddiqui (Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia), N. Saeed (ILMA University, Karachi, Pakistan); The Unification of Product Life-cycle and Industry Life-cycle: A Framework for Telecom Sector in Pakistan Details
51. E. Leinonen (University of Oulu, Finland); The process and product data management for the marketing, sale and customer modification tasks in BIM-based apartment construction project Details
52. V. Mairura, W. Atambo (Jomo Kenyatta University of Agriculture and Technology, Juja, Kenya); Effect of strategic change management practices on performance of public secondary schools: A survey of public secondary schools in Kisii County Details
53. E. Köhn (Mälardalen University, Västerås, Sweden); Benefits of Simulation Models in Product Data Management System: A pilot study with cooling system simulation models Details
54. I. Garnica-Bohórquez, C. López-Gualdrón, J. Martínez-Gómez (Universidad Industrial de Santander, Bucaramanga, Colombia); Key Performance Indicators at manufacturing workflow in specific medical devices: A Systematic Literature Review Details
55. A. Murillo, J. Martínez, C. López (Universidad Industrial de Santander, Colombia); PLM Strategy Definition in Product Development: Case Study on Lower Limb Sockets Details
56. D. Winkler, L. Kathrein, K. Meixner, S. Biffl (TU Wien, Austria), P. Staufer, M. Pauditz (Stiwa Automation GmbH, Attnang-Puchheim, Austria); Towards a Hybrid Process Model Approach in Production Systems Engineering Details
57. T. Bui (Ho Chi Minh City University, Vietnam), N. Nguyen (Bosch Vietnam); Intelligent Factory and Production Efficiency of Enterprises in Industrial Revolution 4.0 - Research at Bosch Vietnam Details
58. A. A. Meteab, H. F. Dabbas (University of Kufa, Iraq), K. Abd (Iraqi University, Baghdad, Iraq); The effect of strategic re-engineering and Six Sigma techniques on strategic competitiveness in the tourism industry Details
59. J. Kaijansinkko (Saimaa University of Applied Sciences, Lappeenranta, Finland); Product data management and common practises Details
60. S. Kiprotich, J. Kahuthia, G. Kinyua (St. Paul's University, Nairobi, Kenya); An assessment of empirical rational strategy and normative re-educative strategy on organizational performance in public offices in Kenya: a case of Teachers Service Commission Details
61. A. Basseto (Universidade Tecnológica Federal do Paraná, Brasil); Modelo de maturidade para a análise das indústrias no contexto da indústria 4.0 Details
62. M. Luoma (University of Vaasa, Finland); Product lifecycle management in degree level teaching with Teamcenter PLM software Details
63. F. Wågberg (Uppsala University, Sweden); Deliberate and Emergent Strategies for Digital Twin Utilization: A PLM-Principal's Perspective Details
64. L. Vaskic, K. Paetzold (Bundeswehr University, Munich, Germany); The System Life Cycle Turbine: A proposal for a Universal System Life Cycle Model in Aerospace and Defense Details
65. M. Walter, D. Trinh, C. Leyh (Technische Universität Dresden, Germany), V. Vasyutynskyy (SAP SE, Dresden, Germany); Machine Learning goes Measure Management: Leveraging Anomaly Detection and Parts Search to Improve Product-Cost Optimization Details
66. P. Zheng, Z. Wang, C-H. Chen, L. Khoo (Nanyang Technological University, Singapore); A survey of smart product-service systems: Key aspects, challenges and future perspectives Details
67. A. Gludovátz (University of Sopron, Hungary); Monitoring, controlling and analysing production processes from the aspect of Industry 4.0 Details
68. D. Kozma, P. Varga, G. Soos (Budapest University of Technology and Economics, Hungary); Supporting Digital Production, Product Lifecycle and Supply Chain Management in Industry 4.0 by the Arrowhead Framework - a Survey Details
69. D. Jones, C. Snider, L. Kent, B. Hicks (University of Bristol, England); Early Stage Digital Twins for Early Stage Engineering Design Details
70. O. Karwitha, C. Kihinji (University of Nairobi, Kenya); Influence of project management practices on the performance of antenatal care services projects in Kenya Details
71. L. Vaskic, K. Paetzold (Bundeswehr University, Munich, Germany); A Critical Review of the Integrated Logistics Support Suite for Aerospace and Defence Programmes Details
72. F. Basse (RWTH Aachen University, Germany); Gestaltung eines adaptiven Änderungssystems für einen beherrschten Serienhochlauf Details
73. N. Brouns (Eindhoven University of Technology, The Netherlands); On the road towards Smart Manufacturing Details
74. B. Wehner (University of Regensburg, Germany); Potentiale von Enterprise Social Networks und Business Process Management zur Gestaltung effizienter Unternehmen Details
75. A. Walton, M. Grieves, D. Sandall, M. Breault (Florida Institute of Technology, USA); Analyzing the Value of Product Lifecycle Management from Grounded Theory & Models Details
76. L. Lindfred, I. Nordeld (Chalmers University of Technology, Gothenburg, Sweden); Investigating The Move Towards Circular Economy for Consumer and Retail Companies: How can PLM support circular business processes? Details
77. E. Nabati (University of Bremen, Germany); Understanding and fulfilling information needs of stakeholders along product lifecycles- Applying data analytics in product lifecycle management Details
78. R. Fujdiak, P. Mlynek, M. Barabas, P. Blazek, F. Borcik, J. Misurec (Brno University of Technology, Czech Republic), P. Mrnustik (Trustport, Brno, Czech Republic); Managing the Secure Software Development Details
79. A. Buda, A. Jarynowski (Interdisciplinary Research Institute, Wroclaw/Glogów, Poland), V. Belik (Freie Universität Berlin, Germany); The evolution of products in entertainment industry Details
80. P. Blazek, Z. Martinasek, D. Smekal, M. Barabas (Brno University of Technology, Czech Republic), L. Apvrille, R. Pacalet, M. Zoor (Telecom ParisTech, Campus SophiaTech, France), R. Fujdiak, P. Mlynek, P. Mrnustik (Trustport, Brno, Czech Republic); Modeling the Trade-off Between Security and Performance to Support the Product Life Cycle Details
81. P. Ramos (Walden University, Minneapolis, MN, USA); Employee Retention Strategies for Executive Operation Leaders in an Academic Nursing Environment Details
82. M. Hinga (United States International University - Africa, Nairobi, Kenya); Impact of Technological Innovation on Customer Retention at Safaricom Plc in Kenya Details
83. O. Akyeampong (University of Energy and Natural Resources, Sunyani, Ghana); Aboakyer: a traditional festival in decline Details
84. Y. Xin, V. Ojanen, J. Huiskonen (LUT University, Lappeenranta, Finland); Dealing with Knowledge Management Practices in Different Product Lifecycle Phases within Product-service Systems Details
85. M. Rundberg, I. Vendelstrand (Chalmers University of Technology, Gothenburg, Sweden); Project Integration Strategies to Achieve High Performance Buildings Details
86. Y. Bathla (Obuda University, Budapest, Hungary); Info-Chunk Objects as New Behavior Representation for System-based Model of Product Details
87. L. Janhonen (Lappeenranta University of Technology, Finland); Possibilities of PLM systems to improve sustainability of industrial business processes Details
88. T. Tomiyama (Japan Educational Foundation, Tokyo, Japan), E. Lutters (University of Twente, The Netherlands), R. Stark (TU Berlin, Germany), M. Abramovici (Ruhr-Universität Bochum, Germany); Development capabilities for smart products Details
89. A. Nygaard (Kristiania University College, Norway); From linear to circular organization Details
90. S. Zhang (Uppsala University, Sweden); Product structure modeling for ETO system product considering the product lifecycle: A case study of ABB Mine Hoist Details
91. X. Wang, A. Yew, S. Ong, A. Nee (National University of Singapore); Enhancing smart shop floor management with ubiquitous augmented reality Details
92. R. Gutierrez (Concordia University, Montreal, Canada); A Requirement Ontology To Guide The Analysis Of System Life Cycle Processes Details
93. J. Lachenmaier (Universität Stuttgart, Germany); Konzeption und prototypische Implementierung eines entscheidungsunterstützenden IT-Systems für den Einsatz cyber-physischer Produktionssysteme Details
94. F. Elahi, M. Ilyas (Superior University Lahore, Pakistan); Quality management principles and school quality: Testing moderation of professional certification of school principal in private schools of Pakistan Details
95. J. MacGregor, J. MacGregor, D. Cremens (Global Safety Management, Inc., Tampa, FL, USA); System for creating safety data sheets Details
96. P. Kriz (Czech Technical University, Prague, Czech Republic); Product Innovation Process and Launch Strategy in Selected Company Details
97. M. Seppälä (JAMK University of Applied Sciences, Finland); Development of item management Details
98. N. Hartman, E. Kozikowski, S. Thiyagarajan, S. Yun (Purdue University, USA); Digital Enterprise Test Bed and Model-Based Work Instructions Details
99. A. Gibson (Capella University, Minneapolis, MN, USA); Assessment of Acceptance Factors Impacting Adoption and Use of Business Intelligence and Analytics Systems among Small and Medium-Size US Manufacturing Organizations Details
100. S. Singh, S. Misra (Indian Institute of Technology, Kanpur, India); Exploring the Challenges for Adopting the Cloud PLM in Manufacturing Organizations Details
101. S. Singh, S. Misra (Indian Institute of Technology, Kanpur, India), S Kumar (University of St. Thomas, Minneapolis, USA); Critical Barriers to PLM Institutionalization in Manufacturing Organizations Details
102. L. Pomante, V. Muttillo (Università degli Studi dell'Aquila, Italy), B. Krena, T. Vojnar (Brno University of Technology, Czech Republic), F. Veljkovic (Thales Alenia Space, Spain), P. Magnin (Siemens PLM, France), M. Matschnig, B. Fischer, (Siemens AG, Austria), J. Martinez (Tecnalia, Spain), T. Gruber (Austrian Institute of Technology, Vienna, Austria); The AQUAS ECSEL Project Aggregated Quality Assurance for Systems: Co-Engineering Inside and Across the Product Life Cycle Details
103. L. Zhang, W.-Y. Chao, V. Duffy (Purdue University, West Lafayette, IN, USA), Q.-X. Qu (Northeastern University, China); Investigating the Combination of Adaptive UIs and Adaptable UIs for Improving Usability and User Performance of Complex UIs Details
104. L. Block (University of Stuttgart, Germany), O. Riedel, F. Herrmann (Fraunhofer Institute, Stuttgart, Germany); A lifecycle model to support continuous component evolution in embedded automotive systems Details
105. A. Pellicelli, E. Varese, L. Bollani (University of Turin, Italy); Product Risks and Life Cycle Details
106. W. Brabazon (University of Oklahoma, USA); Exploring the role of Continuity Operations Management in University supported Volunteer Student Organizations Details
107. D. Keppel, P. Bretagnolle (Toulouse Business School, France); An Empirical Exploration of the Potential Benefits of Applying Big Data Analytics for Improved Space to Space Operations Management in the Satellite Industry Details
108. S. Sjöberg (JAMK University of Applied Sciences, Finland); Telan osaluettelo PLM-ympäristössä Details
109. Y. Zheng, R. Liu, X. Ming (Shanghai Jiao Tong University, Shanghai, China), M. Li (South China University of Technology, Guangzhou, China); Research on Technical Framework of Design Quality Control for Civil Aircraft R&D Project Details
110. S. Goto (PTC, Tokyo, Japan), O. Yoshie (Waseda University, Tokyo, Japan); PLM Case Studies in Japan Details
111. T. Kymäläinen (Helsinki Metropolia University of Applied Sciences, Finland); Rationalization of Product Configurator Output In the Context of the Case Company Details
112. B. Wilhelmsson (Alfa Laval AB, Lund, Sweden); Alfa Laval's OnePLM Details
113. S. Grönstrand (Outotec, Espoo, Finland), Helena Gutierrez (Share PLM, Reinosa, Spain); How Do Elephants and Ants Tango? Details
114. J. Nascimento, A. Cessa (Faculdade CESUC, Catalao, Brazil); Use of Industry 4.0 Concepts to Use the "Voice of the Product" in the Product Development Process in the Automotive Industry Details
115. J. Conlon (University of Huddersfield, UK); How PLM Drives Innovation in the Curriculum and Pedagogy of Fashion Business Education: A Case Study of a UK Undergraduate Programme Details
116. J-J. Urban-Galindo (Urban-Galindo Conseil, Paris, France), S. Ripailles (PSA GROUP, Paris, France); PLM at GROUPE PSA Details
117. I. Donoghue, L. Hannola, J. Papinniemi (Lappeenranta University of Technology, Finland); Product Lifecycle Management Business Transformation in an Engineering Technology Company Details
118. S. Singh, S. Misra (IIT Kanpur, India); A Study Analysing Individual Perceptions of PLM Benefits Details
119. W. Littell (Ohio University, Athens, USA); Product Lifecycle Management at Viking Range LLC Details
120. A. Camarillo, J. Ríos (Universidad Politécnica de Madrid, Spain), K-D Althoff (University of Hildesheim, Germany); PLM Applied to Manufacturing Problem Solving: A Case Study at Exide Technologies Details
121. S. Singh, S. Misra (IIT Kanpur, India); Significance of Cloud PLM in Industry 4.0 Details
122. I. Morshedzadeh, A. Ng, K. Amouzgar (University of Skövde, Sweden); Management of Virtual Models with Provenance Information in the Context of Product Lifecycle Management: Industrial Case Studies Details
123. M. Holler, L. Barth, R. Fuchs (Zurich University of Applied Sciences, Switzerland); Trustworthy Product Lifecycle Management Using Blockchain Technology - Experience from the Automotive Ecosystem Details
124. R. Van Til (Oakland University, Rochester MI, USA); Integrating PLM into Engineering Education Details
125. J. Gómez, C. Gualdrón, A. Bohórquez, I. Bohórquez (Universidad Industrial de Santander, Bucaramanga, Colombia); PLM Strategy for Developing Specific Medical Devices and Lower Limb Prosthesis at Healthcare Sector: Case Reports from the Academia Details
126. M. Lazoi, M. Marra (Università del Salento, Lecce, Italy); Structuring a Lean Engineering Ontology for Managing the Product Lifecycle Details
127. A. Ledwith, E. Murphy (University of Limerick, Ireland); A New Framework for Modelling Schedules in Complex and Uncertain NPD Projects Details
128. K. Hribernik, K-D Thoben (Bremen University, Germany), D. Arabsolgar (Dena Milano, Italy), A. Canepa (I-Deal SRL, Biella, Italy); Applying Product Usage Information to Optimise the Product Lifecycle in the Clothing and Textiles Industry Details
129. R. Silvola, A. Tolonen, J. Harkonen, H. Haapasalo, T. Mannisto (University of Oulu, Finland); Defining one product data for a product Details
130. O. Markaki, D. Askounis (National Technical University of Athens, Greece); Assessing the operational and economic efficiency benefits of dynamic manufacturing networks through fuzzy cognitive maps: a case study Details
131. A. Fedotova (Bauman Moscow State Technical University, Moscow, Russia), K. Hribernik, K-D. Thoben (BIBA, Bremen, Germany); Application of Allen's Temporal Logic to Ontological Modeling for Enterprise Interoperability Details
132. N. Norazlin, A. Hashim, M. Fauadi (Universiti Teknikal Malaysia Melaka, Malaysia), T. Ito (Tokushima University, Japan); IoT Optimize The Product Lifecycle Management Details
133. S. Singh, S. Misra (IIT Kanpur, India), F. Chan (Hong Kong Polytechnic University, China); Establishment of critical success factors for implementation of product lifecycle management systems Details
134. D. Fomenkov (HSE University, Nizhny Novgorod, Russia); Program of the "Product Management" discipline Details
135. D. Möller (Clausthal University of Technology, Germany), R. Haas (QSO Technologies, Bangalore, India); Automotive Research and Development Details
136. M. Li (University of Alberta, Canada); Integration of a Well-defined BIM Manufacturing External Module with CAD via Associative Features Details
137. V. Taberko, D. Ivaniuk, V. Kasyanik (JSC Savushkin Product, Brest, Republic of Belarus), V. Golovko (Brest State Technical University, Brest, Republic of Belarus), K. Rusetski, D. Shunkevich, N. Grakova (Belarusian State University of Informatics and Radioelectronics, Minsk, Republic of Belarus); Design Principles of Integrated Information Services for Batch Manufacturing Enterprise Employees Details
138. S. Lukens, M. Naik, M. Markham, M. Laplante (GE Digital, Roanoke, VA, USA); Data-driven approach to estimate maintenance life cycle cost of assets Details
139. L. Horváth (Obuda University, Budapest, Hungary); Recent Contribution to Computer Representation of Cyber Physical System for Changed Style of Engineer Cooperation Details
140. S. Gupta (Newcastle University, UK), M. Czinkota (Georgetown University, Washington, DC, USA), S. Ozdemir (Coventry University, UK); Innovation in Sustainability Initiatives through Reverse Channels Details
141. S. Scheele, F. Mantwill (Helmut Schmidt Universität, Hamburg, Germany); Produktdaten-Apps zur Erweiterung der Lifecycle Produktivität Details
142. E. Ribeiro da Silva (Pontifical Catholic University of Parana, Curitiba, Brazil), J. Angelis (KTH - Royal Institute of Technology, Stockholm, Sweden), E. Pinheiro de Lima (Federal University of Technology - Parana, Pato Branco, Brazil); Supplier integration through Digital Manufacturing: a SME paradox Details
143. T. Ferreira, J. Ferreira, M. Faro, S. Azevedo (Instituto Universitário Militar, Lisboa, Portugal); A gestão do ciclo de vida dos sistemas e equipamentos militares Details
144. V. Golenkov, D. Shunkevich, I. Davydenko, N. Grakova (Belarussian State University Informatics and Radioelectronics, Minsk, Belarus); Principles of organization and automation of the semantic computer systems development Details
145. J. Huerta (UNIVA, Guadalajara, Mexico), P. Salazar (IBM Mexico, Guadalajara, Mexico); Audit Process Framework for Data Protection and Privacy Compliance Using Artificial Intelligence and Cognitive Services in Smart Cities Details
146. M. Walter (TU Dresden, Germany); Approach to IS Solution Design and Instantiation for Practice-Oriented Research - A Design Science Research Perspective Details
147. M. Kabir (North York, Canada); Opportunity Development and Commercialization Details
148. M. Kabir (North York, Canada); Knowledge-Based Social Entrepreneurship Details
149. T. Kazda (Czech Technical University, Prague, Czech Republic); Analysis of causes of nonconformities within prototype development and their effects Details
150. O. Kaya, D. Bergsjö (Chalmers University of Technology, Gothenburg, Sweden); Learning from digital disturbance management in an integrated product development and production flow Details
151. I. Jowers, C. Earl (The Open University, Milton Keynes, UK), G. Stiny (MIT, Cambridge MA, USA); Shapes, structures and shape grammar implementation Details
152. Y. Cheng, F. He, X. Lv, W. Cai (Wuhan University, China); On the role of generating textual description for design intent communication in feature-based 3D collaborative design Details
153. J. de Sousa Bastos (Universidade do Porto, Portugal); Understanding Customer-Focused Supply Chain Management: A Set-Based Concept Framework Details
154. E. Chipunza (Cape Peninsula University of Technology, South Africa); Quality management challenges in iterative software product development of a selected software development organisation in Cape Town, South Africa Details
155. R. Hassan (Niels Brock Copenhagen International Business College, Denmark); Impact of viral marketing messages on consumer purchase intention Details
156. H. Putro, E. Suciana, (Tangerang, Indonesia), H. Warnars (Bina Nusantara University, Jakarta, Indonesia); Data Warehouse implementation for Mixing Process in Tire Manufacture Details
157. F. Milani (University of Tartu, Estonia); Digital Business Analysis Details
158. F. Bernard, M. Zare, J-C. Sagot (University of Bourgogne Franche-Comté, Belfort, France), R. Paquin (Airbus, France); Integration of human factors into the design process of helicopter maintainability Details
159. S. Kosenkov, V. Turchaninov, I. Korovin, D. Ivanov (Southern Federal University, Rostov-on-Don, Russian Federation); Digital Twin of the Oil Well, Based on Data Mining Technologies Details
160. T. Jalovaara (Lappeenranta University of Technology, Finland); Digitaalisen kaksosen hyödyntäminen tuoteprosessissa Details
161. M. Kivelä (Lappeenranta University of Technology, Finland); Tuotteen alasajon hallinta tuotannonohjauksen, toimittajasuhteiden ja varaosatoiminnan kannalta Details
162. M. Masár, M. Hudáková (University of Zilina, Slovakia); Project risk identification of a new product in enterprise in Slovakia Details
163. M. Rossoni, G. Colombo, L. Bergonzi (Politecnico di Milano, Milano, Italy); From Customer Requirements to Detailed Design: How Do Product Data Change? Details
164. A. Behera (Queen's University, Belfast, UK), A. McKay, H. Chau, M. Robinson, A. de Pennington, D. Hogg (University of Leeds, UK), C. Earl (Open University, Milton Keynes, UK); Sharing design definitions across product life cycles Details
165. W. Torres, M. van den Brand, A. Serebrenik (Eindhoven University of Technology, The Netherlands); Model Management Tools for Models of Different Domains: A Systematic Literature Review Details
166. F. Schweitzer, M. Handrich, S. Heidenreich (University Grenoble Alpes, France); Digital transformation in the new product development process: the role of it-enabled plm systems for relational, structural, and npd performance Details
167. D. Heber, M. Groll (University of Twente, Netherlands), F. Michelbach (Daimler AG), F. Morelli (Hochschule Pforzheim, Germany); Digital Twin-Konzeption in der Automobilindustrie: Einsatzpotenziale der Blockchain-Technologie Details
168. C. Sillaber (Zicklin Center at Wharton, PA, USA), B. Waltl, U. Gallerdörfer (Technical University Munich, Germany), H. Treiblmaier (MODUL University Vienna, Austria), M. Felderer (University of Innsbruck, Austria); Toward an Integrated Process Model for Smart Contract Engineering Details
169. A. Myrodia (Configit, Copenhagen, Denmark), T. Randrup, L. Hvam (Technical University of Denmark, Lyngby, Denmark); Configuration lifecycle management maturity model Details
170. E. Engh (Quality Software, Norway), V. Zaharia, D. Bordeianu (Politehnica University of Bucharest, Romania); A system of management integration of product costing in industry Details
171. A. Balakrishnan (SRM University, Tamil Nadu, India), J. Suresh (Ashok Nagar, Chennai, Tamil Nadu, India); A conceptual framework for impact of automotive engineering changes in new product development Details

1. A. Fabijan (Malmö University, Sweden); Data-Driven Software Development at Large Scale: from Ad-Hoc Data Collection to Trustworthy Experimentation Details
2. A. Pisla, R-D. Baidoc, L. Kacso-Vidrean, D. Jucan (Technical University of Cluj-Napoca, Romania); Factors in the Life Cycle of Airport Activities Details
3. H. Haapasalo (University of Oulu, Finland); Käyttäjälähtöinen tiedonhallinta Details
4. I. Donoghue, L. Hannola, J. Papinniemi, A. Mikkola (Lappeenranta University of Technology, Lappeenranta, Finland); The Benefits and Impact of Digital Twins in Product Development Phase of PLM Details
5. J. Landahl (Chalmers University of Technology, Gothenburg, Sweden); Platform Design for Producibility: Early-Stage Modeling and Assessment Support Details
6. C. Sillaber (University of Pennsylvania, Philadelphia, USA), B. Waltl, U. Gallerdörfer (Technical University Munich, Germany), H. Treiblmaier (MODUL University, Vienna, Austria), M. Felderer (University of Innsbruck, Austria); Toward an Integrated Process Model for Smart Contract Engineering Details
7. L. Plo (Université de Bordeaux, France); Proposition d'une démarche de déploiement d'une solution PLM dans des entreprises "libérées" : cas du biscuitier POULT Details
8. C. Ardila Mejia, C. Lopez Gualdron, J. Martínez Gomez (Universidad Industrial de Santander, Bucaramanga, Colombia); Product Lifecycle Management Strategy for the Definition and Design Process of Face Implants Oriented to Specific Patients Details
9. P. Chiabert (Politecnico di Torino, Italy), A. Bouras (Qatar University, Doha, Qatar), F. Noël (INP Grenoble, France), J. Ríos (Polytechnic University of Madrid, Spain); Product Lifecycle Management to Support Industry 4.0 Details
10. E. Venghaus, R. Stark (Technische Universität Berlin, Germany); Understanding PLM and PLM Customizing: A Theoretical Fundament for a Conceptual Approach Details
11. F. Nyffenegger, A. Reisch (University of Applied Sciences HSR, Rapperswil, Switzerland), R. Hänggi (Ernst & Young GmbH, Berlin, Germany); A Reference Model for PLM in the Area of Digitization Details
12. B. Koomen (University of Twente, Enschede, The Netherlands); PLM in SME, What Are We Missing? An Alternative View on PLM Implementation for SME Details
13. A. Corallo, M. Lazoi, M. Marra, L. Quarta (Università del Salento, Lecce, Italy); Innovating Performing Arts Management Through a Product Lifecycle Management Approach Details
14. C. Di Biccari, G. Mangialardi, M. Lazoi, A. Corallo (Università del Salento, Lecce, Italy); Configuration Views from PLM to Building Lifecycle Management Details
15. K. Pereira dos Santos, E. Rocha Loures, O. Canciglieri, E. Portela Santos (Pontifical Catholic University of Paraná, Curitiba, Brazil); Product Lifecycle Management Maturity Models in Industry 4.0 Details
16. P. Mandale; Applicability of Product Lifecycle Management to Small and Medium Scale Enterprises: Issues and Potential Solutions Details
17. S. Singh, S. Misra (Indian Institute of Technology Kanpur, India); Identification of barriers to PLM institutionalization in large manufacturing organizations: A case study Details
18. M. Ciechan-Kujawa, K. Sychta (Nicolaus Copernicus University, Torun, Poland); Cost accounting of product lifecycle in the practice of Polish enterprises Details
19. L. Dalenogare (Universidade Federal do Rio Grande do Sul, Porto Alegre, Brazil); A Indústria 4.0 no Brasil: um estudo dos benefícios esperados e tecnologias habilitadoras Details
20. S. Paton (University of Strathclyde, Glasgow, UK), B. Andrew (Thales UK, Glasgow, UK); The role of the Project Management Office (PMO) in product lifecycle management: A case study in the defence industry Details
21. T. Suryanto (Universitas Islam Negeri Raden Intan Lampung, Indonesia), M. Haseeb, N. Hartani (Universiti Utara Malaysia, Sintok, Kedah, Malaysia); The Correlates of Developing Green Supply Chain Management Practices: Firms Level Analysis in Malaysia Details
22. B. Diaw, G. Asare (Nanjing University of Posts and Telecommunications, China); Effect of Innovation on Customer Satisfaction and Customer Retention in the Telecommunication Industry in Ghana Details
23. Y. Eslami, M. Mohaghegh (Politecnico di Milano, Italy); A Product Development Framework Using Quality-Based Appraoches Details
24. N. Preniqi, P. Kopacek (Technische Universität Wien, Austria), M Gërvalla (Universiteti për Biznes dhe Teknologji, Pristina, Kosovo); Investigate PLM Presence - Case study of Kosovo and Albania Details
25. C. Pereira de Lemos (Instituto Superior de Engenharia do Porto, Portugal); Codificação interna do artigo - Roadmap Details
26. Y. Liu, J. Prote, M. Molitor, G. Schuh (RWTH Aachen University, Germany); Framework for Designing Production Systems 4.0 Details
27. A. Cartile (Concordia University, Montreal, Canada); Process mapping approaches for high-value safety-critical aircraft modification design and development: A case study Details
28. V. Chekurin (National Academy of Sciences of Ukraine, Lviv, Ukraine), Y. Ponomaryov, M. Prytula (JSC "Ukrtransgaz", Kharkiv, Ukraine), O. Khymko (Lviv Polytechnic National University, Ukraine); Development of an approach to automation of gas transmission system management Details
29. H. Voet, M. Altenhof, M. Ellerich, R. Schmitt (RWTH Aachen University, Germany), B. Linke (University of California Davis, USA); A Framework for the Capture and Analysis of Product Usage Data for Continuous Product Improvement Details
30. V. Muraviev, I. Baranova, E. Bykova, T. Khronusova, M. Nazarenko (Moscow Technological University, Russia); Company Life Cycle and Quality Standardization Details
31. S. Saleh, N. Shadnoush (Islamic Azad University, Tehran, Iran), E. Khaneghah (Shahed University, Tehran, Iran), A. Aliev (Azerbaijan State Oil and Industry University, Baku, Azerbaijan); A mathematical framework for managing interactive communication distortions in exascale organizations Details
32. K. Tahera (Huddersfield University, UK) and C. Earl (Open University, UK); Testing and PLM: Connecting Process and Product Models in Product Development Details
33. R. Udroiu (Transilvania University of Brasov, Romania), P. Bere (Technical University of Cluj-Napoca, Romania); Product Lifecycle Management - Terminology Details
34. A. Fabijan, H. Olsson (Malmö University, Sweden), P. Dmitriev (Outreach.io, Seattle, WA, USA), C. McFarland (Skyscanner, Edinburgh, Scotland), L. Vermeer (Booking.com, Amsterdam, Netherlands), J. Bosch (Chalmers University, Gothenburg, Sweden); Experimentation growth: Evolving trustworthy A/B testing capabilities in online software companies Details
35. J. Landahl, M. Panarotto, H. Johannesson (Chalmers University of Technology, Gothenburg, Sweden), O. Isaksson, J. Lööf (GKN Aerospace Sweden AB); Towards Adopting Digital Twins to Support Design Reuse during Platform Concept Development Details
36. U. Dombrowski, A. Reiswich, A. Karl (Technische Universitat Braunschweig, Brunswick, Germany); Designing digital tools for factory planning: Integrating requirements for usability on a meta-level Details
37. M. Unterhofer (Libera Universita di Bolzano, Bolzano, Italy); Assessment model for industrial companies to define the maturity level of Industry 4.0 implementation Details
38. M. Kjellsson, M. Larsson (Orebro University, Sweden); 3D CAD Methodology Prestudy Details
39. F. Lopez Navarro, M. Espasa Sempere, J. Puigoriol Forcada (Institut Quimic Sarria, Barcelona, Spain); Implementation of PLM methodology in university teaching. Case: automotive Details
40. V. Fortineau (Khtema, Paris, France), T. Paviot, S. Lamouri (Arts et Metiers ParisTech, Paris, France); Automated business rules and requirements to enrich product-centric information Details
41. M. Juliansyah (Syarif Hidayatullah State Islamic University, Jakarta, Indonesia); Pengaruh Image Product Terhadap Loyalitas Pengguna E-Commerce di Indonesia dengan Menggunakan Model Expectation Confirmation Theory (ECT) dan Theory Reasoned Action (TRA) Details
42. O. Makinen (JAMK University of Applied Sciences, Jyvaskyla, Finland); Mallisarjan alasajo Details
43. K. Henriksson (Novia University of Applied Sciences, Vaasa, Finland); Verifying of a PLM impact analysis Details
44. P. Zheng, Y. Lin, X. Xu (University of Auckland, New Zealand), C. Chen (Nanyang Technological University, Singapore); Smart, connected open architecture product: an IT-driven co-creation paradigm with lifecycle personalization concerns Details
45. T. Karttiala (Metropolia University of Applied Sciences, Helsinki, Finland); PLM Competence and Improving Teaching at Universities of Applied Sciences Details
46. L. Askew, A. Desai (Georgia Soutern University, Statesboro, Georgia, USA); Green and Environment Conscious Manufacturing and Management Techniques Details
47. M. Wu, (National Yunlin University of Science and Technology, Yunlin, Taiwan), I. Siswanto (Yogyakarta State University, Yogyakarta, Indonesia), C. Ko (National Taichung University of Science and Technology, Taichung, Taiwan), A. Minghat (Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia), S. Mustakim (Universiti Putra Malaysia, Malaysia); The proactivity of academic elites: a systematical approach to proactive behavior development in university settings Details
48. A. Rauzy, C. Haskins (Norwegian University of Science and Technology, Trondheim, Norway); Foundations for model-based systems engineering and model-based safety assessment Details
49. M. Cholewa, J. Czajka (Politechnika Wrocławska, Poland); A Concept for the Improvement of Production Preparation and Launch Processes Details
50. M. Becker, B. Zhang (Fraunhofer Institute, Kaiserslautern, Germany); How do our neighbours do product line engineering?: a comparison of hardware and software product line engineering approaches from an industrial perspective Details
51. T. Sithole (North-West University, Potchefstroom, South Africa); Examining the implementation of quality control procedures in a selected power station Details
52. G. Soos, D. Kozma, F. Janky, P. Varga (Budapest University of Technology and Economics, Hungary); IoT Device Lifecycle - A Generic Model and a Use Case for Cellular Mobile Networks Details
53. L Plo (Groupe POULT, Montauban, France), V. Robin, P. Girard (Université de Bordeaux, France); Une démarche pour anticiper le déploiement d'un PLM dans une entreprise "libérée" - Cas du groupe Poult Details
54. G. Mazzuto, M. Bevilacqua, F. Ciarapica (Università Politecnica delle Marche, Ancona, Italy); Performance Analysis of New Product Development Process through Timed Coloured Petri Nets Details
55. C. Devra (Singhania University, Rajasthan, India); Issues and Challenges with Product Lifecycle Management (PLM) System Implementation Guidelines Details
56. F. Schönteich (Christian-Albrechts-Universität, Kiel, Germany), A. Kasten (Debeka, Koblenz, Germany), A. Scherp (University of Stirling, Scotland, UK); A Pattern-Based Core Ontology for Product Lifecycle Management based on DUL Details
57. M. Freitag (Fraunhofer IAO, Stuttgart, Germany), S. Wiesner (University of Bremen, Germany); Smart Service Lifecycle Management: A Framework and Use Case Details
58. L. Dalenogare, G. Benitez, A. Frank (Universidade Federal do Rio Grande do Sul, Brazil), N. Ayala (G-SCOP Laboratory, Grenoble Institute of Technology, France); The expected contribution of Industry 4.0 technologies for industrial performance Details
59. T. Ngo (Université Bretagne Loire, Rennes, France); A PLM based approach for supporting collaboration and knowledge management in the medical domain: Application to the treatment process requiring prosthesis implantation Details
60. M. Paavel (Tallinn University of Technology, Tallinn, Estonia); Product Lifecycle Management Maturity Model Development Details
61. J. Varis (Lappeenranta University of Technology, Finland); Product ramp down as part of product lifecycle management Details
62. O. Chamorro Altahona, H. Hernández (Universidad del Atlántico, Barranquilla, Colombia), W.Niebles Nuñez (Universidad de Sucre, Sincelejo, Colombia); Use of Statistical Tools for Market Research as a Differentiating Factor in Business Process Training Details
63. M. Fahmideh, G. Beydoun (University of Technology Sydney, Sydney, Australia); Big data analytics architecture design - an application in manufacturing systems Details
64. J. Hamilton, M. Jeresi (Linköping University, Sweden); Geometry-Based Requirements: Support requirement owners in connecting and mediating requirements from SystemWeaver to CATIA V5 Details
65. A. Bask, M. Halme, M. Kuula (Aalto University, Helsinki, Finland); Capturing the sustainability features that most affect consumer evaluations case: mobile phones Details
66. H. Dincer, S. Yuksel (Istanbul Medipol University, Turkey), L. Martinez (Universidad de Jaen, Spain); Balanced scorecard-based Analysis about European Energy Investment Policies: A hybrid hesitant fuzzy decision-making approach with Quality Function Deployment Details
67. K. Röschke (Otto-von-Guericke-Universität Magdeburg, Germany); Vereinbarung von Big Data mit den Zielen für eine nachhaltige Entwicklung Details
68. E. Hoos, P. Hirmer, B. Mitschang (University of Stuttgart, Stuttgart, Germany); Automated Creation and Provisioning of Decision Information Packages for the Smart Factory Details
69. V. Soni, V. Pandey, S. Asati (Dr. H.S. Gour University, Sagar, India), R. Tekade (NIPER, Ahmedabad, India); Impact of Pharmaceutical Product Quality on Clinical Efficacy Details
70. A. Hefnawy, C. Cherifi (Université Lumière Lyon 2, France), A. Bouras (Qatar University, Doha, Qatar); Relevance of lifecycle management to smart city development Details
71. P. Thapa (International Center for Academics, Gyaneshwor, Nepal); An Analysis of the Implementation of the Factors of Customer Retention by Nepal Telecom Details
72. Y-M. Tai (National Pingtung University, Taiwan), S-C. Lin (Tatung University, Taiwan); Product Lifecycle Management System and NPD Performance: The Role of Coordination Capability and Organizational Ambidexterity Details
73. N. Littell (Ohio University, Athens, USA); Defining Product Lifecycle Management: Comparing the Perspectives of Users and Consultants Details
74. J. Fottner, N. Hietschold (Technische Universität, München, Germany); StartupLog - Entwicklung eines adaptiven Logistikkonzeptes für technologieorientierte Startups Details
75. A. Piazza (Florida Institute of Technology, Melbourne, Florida, USA); Cost Model Evaluation for Large Scale Additive Manufacturing Details
76. Y. Zidane (Norwegian University of Science and Technology, Trondheim, Norway); "Need for Speed" Insights into the Concept of Time in Managing Large-Scale Projects Details
77. B. Chebel-Morello, J-M. Nicod, C. Varnier (ENSMM, Besancon, France); Du concept de PHM à la maintenance predictive 2: Connaissance, tracabilite et decision Details
78. D. Diener (Chalmers University of Technology, Gothenburg, Sweden); Scrap happens, but does it have to? On the potential of increasing machine component reuseDetails
79. A. Deuter, A. Otte, M. Ebert (OWL University of Applied Sciences, Lemgo, Germany), F. Possel-Dolken (PHOENIX CONTACT GmbH & Co. KG, Blomberg, Germany); Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study Details
80. C. Steinmetz (Universidade Federal do Rio Grande do Sul, Porto Alegre, Brazil); An approach for the integration of industrial systems through the adoption of the internet of things and semantic model concepts in the industry 4.0 context Details
81. I. Donoghue, L. Hannola, J. Papinniemi (Lappeenranta University of Technology, Lappeenranta, Finland); Product Lifecycle Management Framework for Business Transformation Details
82. Y. Xin, V. Ojanen, J. Huiskonen (Lappeenranta University of Technology, Lappeenranta, Finland); Knowledge Management in Product-Service Systems - A Product Lifecycle Perspective Details
83. Y. Sharma, S. Mangla, P. Patil, S. Uniyal (Graphic Era University, Uttarakhand, India); Analyzing Sustainable Food Supply Chain Management Challenges in India Details
84. V. Singh, K. Willcox (Massachusetts Institute of Technology, Cambridge, MA, USA); Engineering Design with Digital Thread Details
85. K. Shin (Loughborough University, Loughborough, UK); A strategic support tool for the incorporation of societal benefits into toy design Details
86. I. Shchudlak (Odessa State Academy of Civil Engineering and Architecture, Ukraine); Marketing of goods at different stages of the lifecycle Details
87. S. Mattila (University of Jyvaskyla, Finland); Product information management challenges in B2B e-commerce: a case study in spare parts business Details
88. R. Aho (Aalto University, Finland); Utilization of production planning tools in design for manufacturing of electric machines Details
89. J-G. Shi, H. Si, Y. Su, J. Lan (Tongji University, Shanghai, China), G. Wu (Jiangxi University, Nanchang, China); Critical Factors to Achieve Dockless Bike-Sharing Sustainability in China Details
90. C. Zehbold (Technische Hochschule Ingolstadt, Ingolstadt, Germany); Product Lifecycle Management (PLM) im Kontext von Industrie 4.0 Details
91. S. Singh, S. Misra (Indian Institute of Technology, Kanpur, Uttar Pradesh, India); Success determinants to Product Lifecycle Management (PLM) performanceDetails
92. C. Møller (Technical University of Denmark, Lyngby, Denmark); Organizational learning perspective on continuous improvement and innovation in product realization Details
93. T. Pelkonen (JAMK University of Applied Sciences, Jyvaskyla, Finland); Preliminary report for a PLM project Details
94. C. Fredborg, A. Nilsson (KTH, Stockholm, Sweden); Consideration of downstream functions in New Product Development Details
95. A. Stronczek (AGH University of Science and Technology, Krakow, Poland); PLM : wykorzystanie systemów komputerowych do zarzadzania cyklem zycia produktu Details
96. M. Hughes (Purdue University, West Lafayette, Indiana, USA); A Study on Synthesizing PDM and LMS in K-12 Environments Details
97. K. Abbas (Liverpool John Moores University, England); Knowledge-sharing behaviour intentions of academics and their determinants Details
98. G. van Capelleveen (University of Twente, The Netherlands), J. Pohl (Technische Universitat Berlin, Germany), A. Fritsch (Karlsruhe Institute of Technology, Germany), D. Schien (University of Bristol, UK); The Footprint of Things: A hybrid approach towards the collection, storage and distribution of life cycle inventory data Details
99. M. Holler, F. Uebernickel, W. Brenner (University of St. Gallen, Switzerland); The Evolution of IS Projects in Manufacturing Industries: The Case of Product Lifecycle Management Details
100. S. Vajna (Otto-von-Guericke-Universitat, Magdeburg, Germany), C. Weber (Technische Universitat Ilmenau, Germany), K. Zeman (Johannes Keppler Universitat, Linz, Austria), P. Hehenberger (Fachhochschule Oberosterreich, Wels, Austria), D. Gerhard (Technische Universitat Wien, Austria), S. Wartzack (Universitat Erlangen-Nurnberg, Erlangen, Germany); Wirtschaftliche Bewertung von Anwendungssystemen Details
101. H. Gaspar (NTNU, Alesund, Norway); Data-Driven Ship Design Details
102. A. Oliveira (University of Campinas, Brazil); Proposal of product lifecycle management supporting the organizations competitiveness state Details
103. K. Dahou, I. Hacini (University of Mascara, Algeria); Successful Employee Empowerment: Major Determinants in the Jordanian Context Details
104. P. Lehtovare, (JAMK University of Applied Sciences, Jyvaskyla, Finland); Development of the traceability process of the component information data Details
105. N. Ali, N. Akhtar (National University of Modern Languages, Islamabad, Pakistan); Investigating the role of TQM Focused SCM Practices on Knowledge Management and Competitive Advantage: Textile sector of Pakistan Details
106. A. Cencen, J. Geraedts (Delft University of Technology, The Netherlands), J. Verlinden (University of Antwerp, Belgium); A Design Methodology to Improve Human-Robot Coproduction in Small and Medium Sized Enterprises Details
107. J. Van Croonenborch (Universiteit Gent, Belgium); De Prijs van het Publieke Debat Details
108. M. Nyyssonen (Metropolia University of Applied Sciences, Helsinki, Finland); Siemens PLM Software, NX, Simcenter Motion: Statement of Accessibilities for Teaching Details
109. A. Botha (University of Pretoria, South Africa); Financial behaviours of customers as determinants for risk aversion and insurance consumption in South Africa Details
110. K. D. Seevers, F. Badurdeen, I.S. Jawahir (University of Kentucky, USA); Value creation for lifecycle based product development through the sustainable half-life return model Details
111. J. Enríquez, J. Sanchez-Begines, F. Domínguez-Mayo, J. García-García, M. Escalona (University of Seville, Spain); An approach to characterize and evaluate the quality of Product Lifecycle Management Software Systems Details
112. A. Smirnov, N. Shilov (ITMO University, St. Petersburg, Russia), A. Oroszi, M. Sinko (Festo AG &Co. KG, Esslingen, Germany), T. Krebs (encoway GmbH, Bremen, Germany); Changing information management for product-service system engineering: customer-oriented strategies and lessons learned Details
113. C. Pinna, M. Rossi, S. Terzi (Politecnico di Milano, Italy), F. Galati (University of Parma, Italy), C. Saidy, R. Harik (University of South Carolina, Columbia, USA); Effect of product lifecycle management on new product development performances: Evidence from the food industry Details
114. A. Camarillo, J. Rios (Polytechnic University of Madrid, Spain), K-D Althoff (University of Hildesheim, Germany); Knowledge-based multi-agent system for manufacturing problem solving process in production plants Details
115. K. Hu (Vanderbilt University, Nashville, USA), J. Acimovic (Penn State University, USA), F. Erize (Dell Technologies, Texas, USA), D. Thomas (University of Virginia, Charlottesville, USA), J. Van Mieghem (Kellogg School of Management, Northwestern University, Evanston, USA); Forecasting New Product Life Cycle Curves: Practical Approach and Empirical Analysis Details
116. M. Holler, C. Dremel, M. Herterich, F. Uebernickel, W. Brenner (Universitat St.Gallen, Switzerland); Product Lifecycle Management im Konzernumfeld - Herausforderungen, Losungsansatze und Handlungsempfehlungen Details
117. V. Ostring (Tampere University of Applied Sciences, Finland); Improving traceability in manufacturing Details
118. Y. Bathla (Obuda University, Budapest, Hungary), M. Al-Bkree; Web application for 3D software comparison considering PLM system Details
119. A. Fabijan (Malmö University, Sweden); Data-Driven Software Development at Large Scale : from Ad-Hoc Data Collection to Trustworthy Experimentation Details
120. J. Verrollot (University of Oulu, Finland); Mature supply management as an enabler for rapid product development and product portfolio renewal Details
121. J. Keinanen (Metropolia University of Applied Sciences, Finland); Assessment of Product Data Quality Details
122. L. Toche Fumchum (ecole Polytechnique de Montreal, Canada); Set-Based Prototyping in the Context of the Configurable Virtual Product: The Construction of the Learning Value Streams (LVS) Model Details
123. P. Cha (University of Sao Paulo, Brazil); Pricing strategies at innovation diffusion process: Agent-based model simulation applied to Brazilians market of electric car Details
124. A. Wangila (KCA University, Nairobi, Kenya); Strategies Adopted To Enhance Financial Stability Among Commercial Banks In Kenya Details
125. C. Li, A. Dodor, F. Boabeng, S. Asim (Jiangsu University, Zhenjiang, China); Is Moderator Opportunity a Trigger Factor for the Contribution of Small Startup Business to the Mechanism Of Self-Organized Entrepreneur Behavior? Details
126. A. Aravind (Purdue University, West Lafayette, Indiana, USA); A Study on Understanding the Creation of Component Maintenance Manual Using Model-Based Definition Details
127. B. Toche, R. Pellerin (Ecole Polytechnique de Montreal, Canada), G. McSorley (University of Prince Edward Island, Canada), C. Fortin (Skolkovo Institute of Science and Technology, Moscow, Russia); A framework to support collaboration during prototyping and testing Details
128. X. Yu, H. Zhang, A. Bouras, Y. Ouzrout, A. Sekhari (Universite Lumiere, Lyon 2, France); Multi-Criteria Decision Making for PLM Maturity Analysis Based on an Integrated Fuzzy AHP and Vikor Methodology Details
129. Y. Xin, V. Ojanen (Lappeenranta University of Technology, Lappeenranta, Finland); The impact of digitalization on product lifecycle management: How to deal with it? Details
130. D. Morar, H-G Kemper (University of Stuttgart, Germany), H. Lasi (Steinbeis-Stiftung, Stuttgart, Germany); Challenges in Processing Digital and Physical Parts in Additive Manufacturing: An Exploration Details
131. O. Drozd, D. Kapulin (Siberian Federal University, Krasnoyarsk, Russian Federation); Support of the Integrated Circuits Life Cycle Taking into Account the Influence of the Human Factor on Communication Processes Details
132. C. Holligan, V. Hargaden, N. Papakostas (University College Dublin, Ireland); Product lifecycle management and digital manufacturing technologies in the era of cloud computing Details
133. A. Alhyari (The British University in Dubai); The Integration of Sustainability in Project Management and Its Impact on UAE Construction Projects Performance Details
134. F. Sanchez Sabido (Universidad de Sevilla, Spain); Analisis, diseno e implementacion de un sistema de equilibrado en un entorno PLM Details
135. L. Paukkunen (Aalto University, Finland); Development of metrics and automation for product model verification Details
136. L. Hvam, K. Kristjansdottir, S. Shafiee, N. Mortensen, Z. Herbert-Hansen (Technical University of Denmark, Lyngby, Denmark); The impact of applying product-modelling techniques in configurator projects Details
137. F. Carrascosa García (Autonomous University of Madrid, Spain); Analyzing Part Lifecycle inside a manufacturer of chip-making equipment Details
138. D. Pena Ramírez (Universidad Nacional de Colombia, Bogota, Colombia); Diseno y Construccion de un prototipo de maquina de prototipado rapido CNC por FDM Details
139. M. Valkovicova (PROARCH, Poprad, Slovak Republic); Barriers of corporate social responsibility implementation in Slovak construction enterprises Details
140. F. Geyer, J. Lehnen, C. Herstatt (Hamburg University of Technology, Germany); Customer Need Identification Methods in New Product Development: What Works "Best"? Details
141. G. Blondet (Universite de Technologie de Compiegne, Compiegne, France); Systeme à base de connaissances pour le processus de plan d'experiences numeriques Details
142. N. Sanchez, R. Serrezuela, A. Ramos (University Corporation of the Huila Region, Colombia); Optimization of the Paddy Rice Husking Process, Increasing the Useful Life of the Rollers in FlorHuila S.A. Plant Campoalegre Mills in 2017 Details
143. N. Sanchez, R. Serrezuela, A. Ramos, J. Trujillo (University Corporation of the Huila Region, Colombia); Real Process Characteristic Capacity Weight in the Product 500 Grams in a Rice Mill Details
144. T. Manninen (JAMK University of Applied Sciences, Jyvaskyla, Finland); Development of traceability and inventory management Details
145. S. Mariamdaran, A. Veloo (University Utara Malaysia, Malaysia); Relationship between information overload syndrome (IOS) and stress management of post graduate students Details
146. J. Garcia-Garcia, M Escalona, J. Enríquez (University of Seville, Argentina), M. Urbieta, G. Rossi (Universidad Nacional de La Plata, Argentina); Identifying functional requirements inconsistencies in multi-team projects framed into a model-based methodology Details
147. L. Horvath, I. Rudas (Obuda University, Budapest, Hungary); Information Content Driven Model for Virtual Engineering Space Details
148. C. Groeger (Robert Bosch GmbH, Gerlingen-Schillerhoehe, Germany); Building an Industry 4.0 Analytics Platform Details
149. M. Coufal (University of West Bohemia, Pilsen, Czech Republic); The National Initiative Industry 4.0 - recommendations for industry and society Details
150. M. Malavasi, G. Schenetti (Politecnico di Milano, Italy); Lean Manufacturing and Industry 4.0: an empirical analysis between Sustaining and Disruptive Change Details
151. E. Kolonias, N. Mavragani (Western Greece University of Applied Sciences, Patra, Greece); The innovation of open source business resource management systems through adempiere ERP Details
152. L. Paganin (Federal University of Technology, Curitiba, Parana, Brazil); Ontological model for determination of test planning considering the product usage profile: a case applied in starting motors of agricultural tractors Details
153. M. Walter, C. Leyh, S. Strahringer (TU Dresden, Germany); Knocking on Industry's Door: Needs in Product-Cost Optimization in the Early Product Life Cycle Stages Details
154. J. Stark (Geneva, Switzerland); Product Lifecycle Management (Volume 3): The Executive Summary Details
155. D. Shumway, J. Sadler, J. Salmon (Brigham Young University, Provo, UT, USA); Hybrid state transactional database for product lifecycle management features in a multi-engineer synchronous heterogeneous CAD environment Details
156. S. Matsumoto, M. Matsuda (Kanagawa Institute of Technology, Kanagawa, Japan); Virtual PCA line constructed for simulation of time series changes of power consumption considering the effect of product flow Details
157. E. Romare (KTH, Stockholm, Sweden); Forming the future digitalized supply chain through the use of blockchain technology Details
158. M. Holler (University of St.Gallen, Switzerland); Mapping the Field of Product Lifecycle Management: A Bibliometric Study Details
159. V. Gecevska (University Ss. Cyril and Methodius, Skopje, Macedonia), F. Cus (University of Maribor, Maribor, Slovenia), F. Lombardi, F. Chiampo (Politecnico di Torino, Torino, Italy); Product lifecycle management competitive technology solution Details

1. R. Dust, A. Ramm, R. Paasch (TU Berlin, Germany); Organisationsentwicklung zur Absicherung neuer Technologien und Geschaftsmodelle in globalen Partnernetzwerken Details
2. A. Smirnov, N. Shilov (SPIIRAS, St. Petersburg, Russia), A. Oroszi, M. Sinko (Festo AG & Co., Esslingen, Germany), T. Krebs (encoway GmbH, Bremen, Germany); Changing Information Management in Product-Service System PLM: Customer-Oriented Strategy Details
3. A. Camarillo (Exide Technologies GmbH, Bad Lauterberg, Germany), J. Ríos (Universidad Politecnica de Madrid, Spain), K-D. Althoff (University of Hildesheim, Germany); Agent Based Framework to Support Manufacturing Problem Solving Integrating Product Lifecycle Management and Case-Based Reasoning Details
4. A. Malagnino, G. Mangialardi, G. Zavarise, A. Corallo (University of Salento, Lecce, Italy); From Traditional Construction Industry Process Management to Building Lifecycle Management Details
5. G. Mangialardi, C. Di Biccari, C. Pascarelli, M. Lazoi, A. Corallo (University of Salento, Lecce, Italy); BIM and PLM Associations in Current Literature Details
6. J. Golovatchev, P. Chatterjee, R. Schüssl (Detecon International GmbH, Cologne, Germany), F. Kraus (Detecon International GmbH, Munich, Germany); PLM 4.0 - Recalibrating Product Development and Management for the Era of Internet of Everything (IoE) Details
7. J. Schmidt (Federal University of Technology, Paraná, Curitiba, Brazil); Expert system based on ontological model to support the detailed project of products in the context of agricultural machinery Details
8. G. Vazquez-Martinez, J. Gonzalez-Compean, V. Sosa-Sosa, M. Morales-Sandoval (Cinvestav Unidad Tamaulipas Research Center, Ciudad Victoria, Mexico), J. Carretero Perez (Carlos III University, Madrid, Spain); CloudChain: A novel distribution model for digital products based on supply chain principles Details
9. Y. Sharma, S. Mangla, P. Patil, S. Uniyal (Graphic Era University, Dehradun, Uttrakhand, India); Analyzing Sustainable Food Supply Chain Management Challenges in India Details
10. M. Okano (Centro Estadual de Educacao Tecnologica Paula Souza, Sao Paulo, Brazil), M. Fernandes, O. Vendrametto (Paulista University, Sao Paulo, Brazil), O. Sobral dos Santos (Potiguar University, Natal, Brazil); How new IT trends are being accepted in P/OM? Details
11. K-H. Koskinen (Aalto University, Finland); Lifecycle information management in a product information model Details
12. B. Moriset (Universite Jean Moulin Lyon 3, France); The Digital and the Reshaping of Traditional Economies Details
13. T. Tamminen (Metropolia University of Applied Sciences, Helsinki, Finland); PLM:n kaytto alihankintaverkostoissa Details
14. R. Ithiru (USIU Africa, Nairobi, Kenya); Strategic Responses to Changes in Business Environment: Case Study of Britam Insurance Company in Kenya Details
15. M. Marra, C. Di Biccari, M. Lazoi, A. Corallo (Universita del Salento, Lecce, Italy); A Gap Analysis Methodology for Product Lifecycle Management Assessment Details
16. C. Scheubel (Technical University of Munich, Germany), P. Bierschneider, H. Gierse, R. Hermann, M. Wokusch (Siemens AG, Germany); Valuing Product Lifecycle Management Details
17. M. Holler, C. Dremel, M. Herterich, F. Uebernickel, W. Brenner (Universitat St.Gallen, Switzerland); Product Lifecycle Management in the Corporate Setting of Multinationals - Challenges, Approaches to Solution and Recommendations for Action Details
18. A Camberos, R. Ramirez-Resendiz, N. Muñoz-Madrigal, O. Jimenez Arevaloa (Universidad Aeronautica en Queretaro, Mexico), D. Briseño-Urbina, (Universidad Nacional Autónoma de Mexico, Queretaro, Mexico); Adaptación de la filosofía PLM en la curricula de la carrera de Ingeniería en Diseño Mecánico Aeronáutico Details
19. A. Pfouga, J. Stjepandic (PROSTEP AG, Germany); Leveraging 3D Geometric Knowledge In The Product Lifecycle based on industrial standards Details
20. M. Rodriguez, I. Díaz, J. Bermejo, R. Sanz, C. Hernández (Universidad Politecnica de Madrid, Spain); Integral Management of Process Plants Systems through their Lifecycle using a Model-Based Engineering Approach Details
21. J. Rodriguez Estupiñan (EPFL, Lausanne, Switzerland); Virtual Prototyping Methodology for Power Automation Cyber-Physical-Systems Details
22. C. Weskamp (Universitat Paderborn, Germany); Ein integrierter Planungsansatz zur Ermittlung eines Produktportfolios und einer Supply Chain-Strategie unter Unsicherheiten Details
23. T. Kokkonen (University of Oulu, Finland); Business case sales planning concept for new products and product portfolio Details
24. M. Nematollahi (KTH, Stockholm, Sweden); Integrering av affarssystem med IT-system på fabriksgolvet - Kartlaggning av behoven hos Danfoss Varmepumpar AB Details
25. M. Aras, H. Syam, Jasruddin, H. Akib, H. Haris (Universitas Negeri Makassar, Indonesia); The Effect of Service Marketing Mix on Consumer Decision Making Details
26. W-L. Wu; A Study of Exploring Key Components for the Initial Stage of Product Lifecycle Management in Industry 4.0 - An Example of Optical Industry Details
27. Lina Nataly, Delio Alexander (National University of Colombia, Bogotá, Colombia); Design of an Architecture for the Evaluation of Traceability in the Supply Chain of Fresh Produce Details
28. E. Mousavi Khaneghah, A. Salem (Shahed University, Tehran, Iran), N. Shadnoush (Islamic Azad University, Tehran, Iran) ; Artemis Time: A Mathematical Model to calculate Maximum acceptable waiting time in B2C E-commerce Details
29. C. Brecher, C. Ecker, W. Herfs, M. Obdenbusch, S. Jeschke, M. Hoffmann, T. Meisen (RWTH Aachen University, Aachen, Germany); The Need of Dynamic and Adaptive Data Models for Cyber-Physical Production Systems Details
30. E. D'Avolio, R. Bandinelli, R. Rinaldi (University of Florence, Italy); A process-oriented framework for PLM implementation in fashion companies Details
31. M. Stabler, J. Weber (Daimler AG, Sindelfingen, Germany), K. Paetzold (Universitat der Bundeswehr, Neubiberg, Germany); Adapt!Evaluation - Evaluation for Design and Re-Design of Production Systems based on Axiomatic Design Details
32. K. Vadoudi, F. Bratec, N. Troussier (Universite de Technologie de Troyes, France); A GIS-oriented semantic data model to support PLM for DfS Details
33. J. Zammit, J. Gao (University of Greenwich, London, UK), R. Evans (University of Westminster, London, UK); The Challenges of Adopting PLM Tools Involving Diversified Technologies in the Automotive Supply Chain Details
34. J. J. Calvo García (Universitat Abat Oliba CEU, Barcelona, Spain); Rendimiento, resiliencia y agilidad de las cadenas de suministros : el caso de las compañias industriales japonesas (2003-2015) Details
35. K. Santos, E. Loures, F. Piechnicki, O. Canciglieri (Pontifical Catholic University of Paraná, Curitiba, Brazil); Opportunities Assessment of Product Development Process in Industry 4.0 Details
36. K. Vadoudi (University of Technology of Troyes, France); On the understanding the link between PLM and geography: Proposal of a semantic data model Details
37. S. Mittal, M. Khan, T. Wuest (West Virginia University, Morgantown, USA), D. Romero (Instituto Tecnológico y de Estudios Superiores de Monterrey, Mexico); Smart manufacturing: Characteristics, technologies and enabling factors Details
38. A. Camarillo (Exide Technologies GmbH, Bad Lauterberg, Germany), J. Ríos (Universidad Politecnica de Madrid, Spain), K. Althoff (German Research Center for Artificial Intelligence, Kaiserslautern, Germany); CBR and PLM applied to diagnosis and technical support during problem solving in the Continuous Improvement Process of manufacturing plants Details
39. S. Chellathurai Saroja (University of Stuttgart, Germany); Measurement of the quality of structured and unstructured data accumulating in the product life cycle in a data quality dashboard Details
40. J. Martins (Universidade do Minho, Guimarães, Portugal); Proposta de um Processo de Engenharia de Requisitos no Ãmbito da Gestão do Ciclo de Vida de Sistemas de Informacão na Bosch Car Multimedia Portugal, S.A. Details
41. L-T. Wei (National Central University, Taoyuan City, Taiwan); A Study on Product Lifecycle Management (PLM) in Industrial Robot Industry Details
42. I. Bouhaddou (Universite du Havre, France); Vers une optimisation de la chaine logistique : proposition de modeles conceptuels bases sur le PLM (Product Lifecycle Management) Details
43. G. Levisauskaite (Norwegian University of Science and Technology, Ålesund, Norway); Implementation of 4GD framework in Ship Design for improving exchange and 3D reuse Details
44. E. Hovden (Norwegian University of Science and Technology, Ålesund, Norway); A System Engineering Approach to evaluate PLM during Upstream Ship Design Processes Details
45. B. Tornes (Norwegian University of Science and Technology, Ålesund, Norway); 3D Reuse in PLM for Conceptual Ship Design Details
46. R. Nakamura (Escola de Engenharia de São Carlos, Universidade de São Paulo, Brazil); Alinhamento do modelo de referência do processo de desenvolvimento de produtos entre cliente (montadora) e fornecedor de primeiro nível no segmento automotivo Details
47. J. Maia, L. Di Serio (Escola de Administracão de Empresas de São Paulo, Brazil); A Multi-Source Bibliometric Analysis About Shareholder Value Generation And Project, Portfolio And Program Management Details
48. B. Ogrizek (Univerza v Mariboru, Slovenia); Zasnova podpornega sistema celovite obdelave podpornih informacij za razvoj novih aparatov Details
49. S. Freitas de Oliveira (INESC TEC, Porto, Portugal), A. Soares (University of Porto, Portugal); A PLM Vision for Circular Economy Details
50. J. Bladh, K. Hertzman (Chalmers University of Technology, Gothenburg, Sweden); Big Data and Product Lifecycle Management Details
51. Y-M. Tai (National Pingtung University, Taiwan); Partner Management Capability and New Product Development Performance: The Moderating Role of Product Lifecycle Management System Capability Details
52. C. Fryden, N. Omri (University of Skovde, Sweden); Efficiency of the designer's workflow in the product development process by using 3D-models and 2D-drawings Details
53. S. Ruan, S. Jiang (Xi'an University, Xi'an, China), H. Xie (Illinois State University, IL, USA); Integrated Proactive Control Model for Energy Efficiency Processes in Facilities Management: Applying Dynamic Exponential Smoothing Optimization Details
54. D. Diener (Chalmers University of Technology, Gothenburg, Sweden); Scrap happens, but does it have to? On the potential of increasing machine component reuse Details
55. D. Siedlak, O. Pinon, P. Schlais, T. Schmidt, D. Mavris (Georgia Institute of Technology, Atlanta, USA); A digital thread approach to support manufacturing-influenced conceptual aircraft design Details
56. P. Torres-Palacio (University of St. Thomas, Houston, TX, USA); Applying holonic manufacturing for effective Six Sigma projects Details
57. E. Hoos, P. Hirmer, B. Mitschang (University of Stuttgart, Germany); Context-Aware Decision Information Packages: An Approach to Human-Centric Smart Factories Details
58. C. Chathurani Silva (Massey University, Auckland, New Zealand); A Framework to Evaluate the Impact of ICT Usage on Collaborative Product Development Performance in Manufacturing Firms Details
59. M. Kalverkamp, A. Pehlken (Carl von Ossietzky University of Oldenburg, Germany), T. Wuest (West Virginia University, Morgantown, WV, USA); Cascade Use and the Management of Product Lifecycles Details
60. C. Pinna, S. Terzi (Politecnico di Milano, Italy), L. Plo (Groupe POULT, Montauban, France), V. Robin, P. Girard (University of Bordeaux, France); An approach to improve implementation of PLM solution in food industry - case study of Poult Group Details
61. T. Huang (The Arctic University of Norway, Narvik, Norway); Development of Small-scale Intelligent Manufacturing System (SIMS) Details
62. F-R. Esch, A. Herrmann, H. Sattler; Marketing: Eine managementorientierte Einführung Details
63. M. Sevdali (University of Piraeus, Greece); Details
64. A. Fedotova, V. Tarassov (Bauman Moscow State Technical University, Moscow, Russia), D. Mouromtsev (National Research University of Information Technologies, Mechanics and Optics, Saint-Petersburg, Russia), I. Davydenko (Belarusian State University of Informatics and Radioelectronics, Minsk, Belarus); Lifecycle Ontologies: Background and State-of-the-Art Details
65. A. Nikolov (Aalto University, Finland); Vulnerability management service for product life cycle Details
66. N. Obuka (Enugu State University, Enugu, Nigeria), P. Onyechi, N. Okoli (Nnamdi Azikiwe University, Awka, Nigeria); Product Lifecycle Engineering and Management a Life Line for SMEs in Nigeria: An Appraisal Details
67. S. Keung (University of South Australia, Adelaide, Australia); The influence of Information Technology, Communication and Relationship Factors on Positive Word-of-Mouth in Relationship Marketing in Hong Kong and Singapore Details
68. M. Walter, C. Leyh (Technische Universitat Dresden, Germany); Knocking on Industry's Door: Product Cost Optimization in the Early Stages Requires Better Software Support Details
69. M. Paavel, K. Karjust, J. Majak (Tallinn University of Technology, Estonia); Development of a product lifecycle management model based on the fuzzy analytic hierarchy process Details
70. M. Cina (Aix-Marseille Universite, France); Les nouvelles plateformes de conception, le PLM et leurs implications dans le processus de conception : portees et limites Details
71. C. Gorldt, S. Wiesner, I. Westphal, K-D. Thoben (University of Bremen, Germany); Product-Service Systems im Zeitalter von Industrie 4.0 in Produktion und Logistik-Auf dem Weg zu Cyber-Physischen Product-Service Systemen Details
72. S. Mariamdaran, A. Veloo (Universiti Utara Malaysia, Sintok, Malaysia); Role of Stress Management on the Relationship between Information Overload Syndrome and Performance of Universiti Utara Malaysia Details
73. B. Chebel-Morello, J-M. Nicod, C. Varnier (Ecole Nationale Superieure de Mecanique et des Microtechniques, Besancon, France); From Prognostics and Health Systems Management to Predictive Maintenance 2 Details
74. S. Sinha, Y. Park (Johnson Controls International, Milwaukee, USA); Building a Winning Team Details
75. M. Paavel, K. Karjust, J. Majak (Tallinn University of Technology, Estonia); PLM Maturity Model Development and Implementation in SME Details
76. S. Sahara (Universitas Muhammadiyah Cirebon, Indonesia); Peran Inovation Relation Behavior dalam Memperkuat Hubungan Psychological Empowerment dan Affective Commitment Employee pada Customer Satisfaction Details
77. G. de Medeiros, T. Florindo (Universidade Federal de Mato Grosso do Sul, Brazil), E. Binotto (Universidade Federal da Grande Dourados, Brazil); Sustainability at the organizational level: a conceptual model for the development of new products Details
78. Z. Vasic, S. Maksimovic, D. Georgijevic (Military Technical Institute, Belgrade, Serbia); Applied Integrated Design in Composite UAV Development Details
79. N-A. Dumitrascu, A. Dinca (ADA Computers, Bucharest, Romania), N. Predincea (Universitatea Politehnica din Bucuresti, Romania); Virtual commissioning of a robotic cell using Tecnomatix process simulate Details
80. H. Marques, D. Coelho (University of Beira Interior, Covilhã, Portugal); A Product's Generalized Life Cycle under a Design Entrepreneurship Perspective: A Case Study Details
81. C. Rivera, J. Poza, G. Ugalde, G. Almandoz (University of Mondragon, Spain); A Knowledge Based System architecture to manage and automate the electrical machine design process Details
82. M. Holler, F. Uebernickel, W. Brenner (University of St.Gallen, St.Gallen, Switzerland); Defining Archetypes of e-Collaboration for Product Development in the Automotive Industry Details
83. Y-M. Tai (National Pingtung University, Pingtung, Taiwan); Effects of product lifecycle management systems on new product development performance Details
84. O. Saarinen (Lappeenranta University of Technology, Finland); Consideration of environmental aspects in machinery and construction companies in South Karelia Details
85. R. Quesada Díaz (University of Skovde, Sweden); Support component reusability by integrating augmented reality and product lifecycle management Details
86. F-M. Binninger (Berlin, Germany); Managing the Diffusion of Innovations, Handbook of the Management of Creativity and Innovation Details
87. J. Xu (Sichuan University, China), L. Xu (Xihua University, Chengdu, China); Integrated System Health Management: Perspectives on Systems Engineering Techniques Details
88. D. Kyei (Maranatha University College, Accra, Ghana), A. Bayoh (Perez University College, Pomadze, Ghana); Innovation and Customer Retention in the Ghanaian telecommunication industry Details
89. I. Hakkarainen (Helsinki Metropolia University of Applied Sciences, Finland); Solidworks-tyokalujen ja PDM-ominaisuuksien mahdollisuudet suunnittelun tehostamisessa Details
90. N. Norazlin, A. Hashim, M. Fauadi, Z. Fu (Universiti Teknikal Malaysia Melaka, Malaysia), T. Ito (Tokushima University, Japan); Rapid Time Response: A solution for Manufacturing Issue Details
91. J. Garcia Agis, P. Brett (Norwegian University of Science and Technology, Trondheim, Norway), H. Gaspar (Norwegian University of Science and Technology, Aalesund, Norway), A. Keane, A. Ebrahimi (Ulstein International AS, Ulsteinvik, Norway); Preparing for a Digital Future - Experiences and Implications from a Maritime Domain Perspective Details
92. M. Ward, O. Uflewska, TC Wong (University of Strathclyde, Glasgow, UK), S. Halliday (Rolls-Royce plc, Derby, UK); Three dimensions of maturity required to achieve future state, technology-enabled manufacturing supply chains Details
93. E. Mustonen (University of Oulu, Finland); Creation of the common commercial product portfolio by the cluster of companies Details
94. S. Wiesner, K-D. Thoben (University of Bremen, Germany); Cyber-Physical Product-Service Systems Details
95. S. Biffl, D. Gerhard (Technische Universitat Wien, Austria), A. Lüder (Otto von Guericke University, Magdeburg, Germany); Introduction to the Multi-Disciplinary Engineering for Cyber-Physical Production Systems Details
96. M. Bernardes Máximo (Universidade Nova de Lisboa, Portugal); Implementacão de um sistema de gestão de dados do produto: caso de estudo no setor industrial Details
97. I. Muthalagu (Minot State University, ND, USA); Data Modeling for Engineering Change Management Processes in Engineering Industries Details
98. M. Ritala, M. Valkonen (Lappeenranta University of Technology, Finland); Teollinen internet ja sen mahdollisuudet seka haasteet paperikoneliiketoiminnassa Details
99. M. Yakovleva (Helsinki Metropolia University of Applied Sciences, Finland); Managing Last Time Buy components Details
100. E. Bronge (KTH, Stockholm, Sweden); Visualization of Feature Dependency Structures: A case study at Scania CV AB Details
101. Z. Jakovljevic, V. Majstorovic, S. Stojadinovic, S. Zivkovic, N. Gligorijevic, M. Pajic (Belgrade University, Serbia); Cyber-Physical Manufacturing Systems (CPMS) Details
102. V. Helynranta (Lappeenranta University of Technology, Finland); A customer-oriented product phase down process in a global company Details
103. H. Mahmoud (University of Bath, England); Resource-Independent Computer Aided Inspection Details
104. C. Ewe (Otto von Guericke University, Magdeburg, Germany); Monitoring of Life Cycle Data to Determine the Environmental Impact of Information and Communication Technology Products Details
105. J. Machac, (Z´padoceská univerzita v Plzni, Pilsen, Czech Republic); Rizikove aspekty zivotního cyklu vyrobku Details
106. J. Herter (Karlsruher Institut für Technologie, Germany); Eine Methode zur Unterstützung der disziplinübergreifenden Zusammenarbeit in der Produktentwicklung auf Grundlage einer integrierten Visualisierung konzeptioneller Modelle Details
107. J. Landahl (Chalmers University of Technology, Gothenburg, Sweden); Development of Interdisciplinary Platforms Using System Objects Details
108. S. Václav, S. Lecky (Slovak University of Technology, Trnava, Slovakia); Impact of Computer Aided Assembly Technologies and Simulation in Production Planning Details
109. F. Tao, Y. Zuo, M. Zhang (Beihang University, Beijing, China), Y. Wang (Northeastern University-Qinhuangdao, China), H. Yang (Guangdong University of Technology, China); Internet of Things in product lifecycle energy management Details
110. B. de Souza, E. Lopes (Federal University of São Paulo, Brazil); Uma Análise sobre os Atributos de Negócio dos Food Trucks que mais Influenciam a Intencão de Recomendacão e Reuso desse Modelo de Negócio Details
111. P. Timofeev, A. Jagopolsky (Bauman Moscow State Technical University, Moscow, Russian Federation); The Role and Significance of PDM Systems in the Development of Manufacturing Equipment Details
112. R. Udroiu (Transilvania University of Brasov, Romania); Integration of Computer-Aided Technologies in Product Lifecycle Management (PLM) and Human Lifecycle Management (HUM) Details
113. F. Tao, J. Cheng, Q. Qi, M. Zhang, H. Zhang, F. Sui (Beihang University, Beijing, China); Digital twin-driven product design, manufacturing and service with big data Details
114. A. Walton, M. Grieves, D. Sandall, M. Breault (Florida Institute of Technology, Melbourne, FL, USA); Developing a Unified Product Lifecycle Management Value Model Details
115. L. Plo (Groupe POULT, Montauban, France), V. Robin, P. Girard (Universite de Bordeaux, France); Understanding PLM System Concepts to Facilitate Its Implementation in SME: The Real Case Study of POULT Details
116. B. Guerineau, M. Bricogne, A. Durupt (Universite de Technologie de Compiegne, France), L. Rivest (Ecole de Technologie Superieure, Montreal, Canada); Agile and Project-Planned Methods in Multidisciplinary Product Design Details
117. V. Basselot, T. Berger, Y. Sallez (Universite de Valenciennes, France); Active Monitoring of a Product: A Way to Solve the "Lack of Information" Issue in the Use Phase Details
118. S. Wiesner, I. Westphal, K-D. Thoben (University of Bremen, Germany); Through-life Engineering in Product-service Systems - Tussles for Design and Implementation Details
119. N. Norazlin, A. Hashim, M. Fauadi (Universiti Teknikal Malaysia Melaka, Malaysia), T. Ito (Tokushima University, Japan); Time Response Study for Communication in Product Lifecycle Management Details
120. D. Antonelli, G. Bruno (Politecnico di Torino, Italy); Product configuration for order acquisition and fulfillment Details
121. D. Fleche, J-B. Bluntzer, M. Mahdjoub, J-C. Sagot (University of Technology of Belfort-Montbeliard, France), A. Al Khatib (Institute of Automotive and Transport Engineering, Nevers, France); Collaborative project: Evolution of computer-aided design data completeness as management information Details
122. P. Reimann (University of Stuttgart, Germany); Data Provisioning in Simulation Workflows Details
123. M. Naskovska, G. Vrtanoski (Ss. Cyril and Methodius University, Skopje, Republic of Macedonia) ; Digital marketing - tool for extending product lifecycle Details
124. A. Zanetti, R. Sabatini, A. Gardi (RMIT University, Melbourne, Australia); Introducing green life cycle management in the civil aviation industry: the state-of-the-art and the future Details
125. F. Gómez Lucena (Universidad de Sevilla, Spain); Generación de Instrucciones de Trabajo con 3DVIA Composer Details
126. T. Woronowicz, M. Boronowsky, D. Wewezer (Universitat Bremen, Germany), A. Mitasiunas (MitSoft, Vilnius, Lithuania), K. Seidel, I. Cotera (IkerConsulting, Bilbao, Spain); Towards a Regional Innovation Strategies Modelling Details
127. B. Skafar (Univerze v Mariboru, Maribor, Slovenia); Podpora tehnicnega informacijskega sistema pri nacrtovanju kakovosti Details
128. V. Modrak, S. Bednar (Technical University of Kosice, Slovakia); Product variety management assuming product configuration conflicts Details
129. S. Sarkar (Berjaya University College of Hospitality, Kuala Lumpur, Malaysia), B. George (Fort Hays State University, Hays, KS, USA); The Life Cycles of Destination Life Cycle Models: A Critical Comparison and Synthesis in the Context of Destinations in Asia Details
130. I. Muthalagu (Minot State University, ND, USA); Data Modeling for Engineering Change Management Processes in Engineering Industries Details
131. H. Sen (Gazi University, Ankara, Turkey), F. Bakar (The Turkish War College, Istanbul, Turkey); Obsolescence Management in the Framework of Product Lifecycle Management and its Significance for Defense Industry Details
132. I. Muthalagu (Minot State University, ND, USA); Product Lifecycle Management (PLM) Document Management System (DMS) Details
133. E. Edstrom, A. Warris (KTH, Stockholm, Sweden); Hantering av CNC-program i tillverkande miljoer Details
134. I. Muthalagu (Minot State University, ND, USA); Applying Relational Database Methods to Product Lifecycle Management (PLM) for Engineering Processes Details
135. I. Muthalagu (Minot State University, ND, USA); PLM Data Structure and Modeling Techniques for Engineering Applications Details
136. D. Siedlak (Georgia Institute of Technology, Atlanta, GA, USA); Robust Scheduling Methodology to Reduce Risk in Aerospace Production Systems Details
137. I. Muthalagu; PLM (Product Lifecycle Management) System Administrator Process for Document Management System (DMS) in Energy Devices Domain Details
138. E. Mercier-Laurent (University Jean Moulin Lyon 3, France); Innovation Ecosystems and Technology Details
139. P. Desai, J. Disouza (Kolhapur, India), V. Patravale (Mumbai, India); Product Life Cycle Management: Stages of New Product Development Details
140. K. Framling, A. Buda, S. Kubler, (Aalto University, Espoo, Finland), J. Cassina, E. Coscia, S. Parrotta (Holonix, Meda, Italy), S. Terzi, D. Cerri (Polytechnic of Milan, Milan, Italy); LEAP Interoperability Standards Details
141. I. Petrisor, D. Cozmiuc (West University of Timisoara, Romania); Global Supply Chain Management Organization at Siemens in the Advent of Industry 4.0 Details
142. M. Lindgren, V. Corrêa, E. Oliveira, P. Lindgren (University of Taubate, Brazil); Lean Engineering: Um Estudo de Caso de Reducão de Problemas na Troca de Informacões no Desenvolvimento de Produtos Details
143. M. Holler, F. Uebernickel, W. Brenner (University of St. Gallen, Switzerland); Challenges in Product Lifecycle Management - Evidence from the Automotive Supply Industry Details
144. S. Goto, O. Yoshie, S. Fujimura (Waseda University, Kitakyushu, Japan); Internet of things value for mechanical engineers and evolving commercial product lifecycle management system Details
145. O. Wijk, P. Andersson, T. Righard (Systecon, Stockholm, Sweden), J. Block (Saab Support Services, Linkoping, Sweden); Phase-Out Maintenance Optimization for an Aircraft Fleet Details
146. M. Medrano González (Massachusetts Institute of Technology, USA); Analysis of product development toolsets for electrical distribution systems in the automotive industry : a study inside an original equipment manufacturer Details
147. M. Holler, F. Uebernickel, W. Brenner (University of St. Gallen, Switzerland); Understanding the Business Value of Intelligent Products for Product Development in Manufacturing Industries Details
148. L. De Paepe (Universiteit Gent, Belgium); Open ERP systemen en ervaringen met post-implementatie casestudie in vlaamse KMO's Details
149. F. Murmura, L. Bravi (University of Urbino, Italy); Exploring customers' perceptions about Quality Management Systems: an empirical study in Italy Details
150. M. Allanic, A. Durupt, B. Eynard (Universite de Technologie de Compiegne, France); P-Y. Herve, M. Joliot (Universite de Bordeaux, France), P.Boutinaud (CADESIS, Courbevoie, France); PLM as a strategy for the management of heterogeneous information in bio-medical imaging field Details
151. O. Labbi, L. Ouzizi, M. Douimi, Y. Aoura (Moulay Ismail University, Meknes, Morocco); A Model to design a Product and its Extended Supply Chain integrating PLM (Product Lifecycle Management) Solution Details
152. A. Niskanen (JAMK University of Applied Sciences, Jyvaskyla, Finland); Item management in SCM Planning team Details

1. I. Jonek-Kowalska, J. Ziemski (Politechnika Slaska, Gliwice, Poland); Contemporary directions of risk management development from the perspective of product lifecycle Details
2. J. Jupp (University of Technology Sydney, Australia); Cross industry learning: a comparative study of product lifecycle management and building information modelling Details
3. J. Conlon (University of Huddersfield, UK); Product Lifecycle Management Details
4. K. Hu, J. Van Mieghem (Northwestern University, USA), J. Acimovic (Penn State University, USA), F. Erize (Dell Inc.), D. Thomas (Pennsylvania State University, USA); Forecasting Product Life Cycle Curves: Practical Approach and Empirical Analysis Details
5. S. Gallasch (University of East Anglia, Norwich, England); A new dimension to EU pharma antitrust product hopping and unilateral pay for delay Details
6. M. Baur (Latvijas Universitate, Riga, Latvia); Key factors for effective succession in the family business: the successor's view Details
7. D. Vieira, A. Bravo (University of Quebec at Trois-Rivieres, Canada); Feasibility of green composite aircraft wing projects for unmanned aircraft vehicles Details
8. I. Grassler, J. Pottebaum (Paderborn University, Germany); Reliable Input for Strategic Planning: The Integrated Scenario Data Model Details
9. M. Fernandes, O. Vendrametto (Universidade Paulista, Brasilia, Brazil), M. Okano (CEETEPS, Sao Paulo, Brazil), O. dos Santos (Universidade Potiguar, Natal, Brazil); Analysis of the integration between Enterprise Resource Planning (ERP) and Product Data Management (PDM) Details
10. L. Horváth (óbuda University, Budapest, Hungary); Representation of intellectual property for multidisciplinary industrial engineering model system Details
11. E. Oseguera (Lappeenranta University of Technology, Finland); The influence of the time factor on product data quality in the fast-moving consumer goods industry Details
12. J. Ríos, J. Hernández (Polytechnic University of Madrid, Spain), F. Morate, M. Oliva (Airbus Group, Seville, Spain); Framework to support the aircraft digital counterpart concept with an industrial design view Details
13. M. Holler, G. Neiditsch, F. Uebernickel, W. Brenner (University of St. Gallen, Switzerland); Digital Product Innovation in Manufacturing Industries - Towards a Taxonomy for Feedback-driven Product Development Scenarios Details
14. E. Lejon (Luleå University of Technology, Sweden); Information Management in Computer-Aided Product Development Details
15. E. Bernerus, M. Karlsson (Chalmers University of Technology, Gothenburg, Sweden); Simulation with 3DEXPERIENCE. Evaluation of software for production flow simulation in manufacturing industry. Details
16. D. Qeshmy, L. Karaman (KTH, Stockholm, Sweden); Product Data Management som ett kvalitetsverktyg: Kan ett PDM-system anvandas som ett kvalitetsverktyg i den tillverkande industrin? Details
17. E. Vezzetti, M. Alemanni, B. Morelli (Politecnico di Torino, Italy); New product development (NPD) of 'family business' dealing in the luxury industry: evaluating maturity stage for implementing a PLM solution Details
18. R. Beckers, S. Giese, A. Pfouga, J. Stjepandic (PROSTEP AG, Germany); Interoperability and Visualization of Complex Products Based on JT Standard Details
19. A. Fabijan, H. Holmstrom Olsson (Malmo University, Sweden), Jan Bosch (Chalmers University of Technology, Gothenburg, Sweden); Time to Say 'Good Bye': Feature Lifecycle Details
20. T. Wuest (West Virginia University, Morgantown, USA), U. Nana (University of Bremen, Germany); State-based representation of a product's middle of life Details
21. D. Vieira, M. Chain (University of Quebec at Trois-Rivieres, Canada), R. Vieira (Federal University of Amazonas, Manaus, Brazil); Elements of managerial integration for sustainable product lifecycle management Details
22. J. Astner (KTH, Stockholm, Sweden); Tillampning av realtidsdata i ett molnbaserat tillverkningsforetag Details
23. T. Wille (ETH Zurich, Switzerland); Lean Thinking in produzierenden Unternehmen Details
24. T. Wuest (West Virginia University, Morgantown, USA), S. Wellsandt (University of Bremen, Germany); Design and Development of Product Service Systems (PSS) - Impact on Product Lifecycle Perspective Details
25. A. Deuter (OWL University of Applied Sciences, Lemgo, Germany), S. Rizzo (Polarion Software GmbH, Stuttgart, Germany); A Critical View on PLM/ALM Convergence in Practice and Research Details
26. V. Mladenovic, (University of Novi Sad, Serbia); Ecological marketing process management by means of PLM tools Details
27. F. Berriche, B. Zeddini, H. Kadima (EISTI, Cergy, France), A. Riviere (SUPMECA, Saint Ouen, France); Closed-Loop Product Lifecycle Management Based on a Multi-agent System for Decision Making in Collaborative Design Details
28. G. Gudergan, A. Buschmeyer, B. Feige, D. Krechting (RWTH Aachen University, Germany), S. Bradenbrink (Langenargen, Germany), R. Mutschler (SAP AG, Biel, Switzerland); Value of Lifecycle Information to Transform the Manufacturing Industry Details
29. H. Hsu (National Cheng Kung University, Tainan, Taiwan); Decision for Product Life Cycle Portfolio Using Fuzzy Linguistic Term Sets Details
30. R. Lawson (Institute of Management Accountants, Montvale, NJ, USA), K. Pincus (University of Arkansas, USA), J. Sorensen (University of Denver, USA), K. Stocks (Brigham Young University, USA), D. Stout (Youngstown State University, USA); Using a Life-Cycle Approach to Manage and Implement Curricular Change Based on Competency Integration Details
31. L. Horváth, I. Rudas (óbuda University, Budapest, Hungary); Content driven generation of RFLP structured Engineering System representation Details
32. M. Essamlali, A. Sekhari (Universite Lumiere Lyon 2, France), A. Bouras (Qatar University, Doha, Qatar); Product lifecycle management solution for collaborative development of Wearable Meta-Products using set-based concurrent engineering Details
33. P. Carmona Marques (Polytechnic Institute of Lisbon, Portugal); Building sustainable creativity: a conceptual framework Details
34. O. Gassmann, R. Sauer (University of St. Gallen, Switzerland), K. Frankenberger (University of Lucerne, Switzerland); Exploring Upcoming Theories for BMI Research: Enlightening the Dark Side of the Moon Details
35. R. Xue (Institut National des Sciences Appliquees de Toulouse, France) ; Improving cooperation between Systems Engineers and Project Managers in engineering projects Details
36. J. Lantta (Tampere University of Technology, Finland); Automaatiolinjan virtuaalikayttoonotto Details
37. M. Holler, E. Stoeckli, F. Uebernickel, W. Brenner (University of St. Gallen, Switzerland); Towards Understanding closed-loop PLM: The Role of Product Usage Data for Product Development enabled by intelligent Properties Details
38. P. Kontodimas, E. Karagiannis (Technological Educational Institute of Western Greece, Messolonghi, Greece); Analytical Study and Comparison of MS Navision and SAP Details
39. R. Lawson (Institute of Management Accountants, Montvale, NJ, USA), K. Pincus (University of Arkansas, USA), J. Sorensen (University of Denver, USA), K. Stocks (Brigham Young University, USA), D. Stout (Youngstown State University, USA); Managing the Curricular-Change Process: Implementing Competency-Based Accounting Education Details
40. T. Woronowicz, M. Boronowsky, D. Wewezer (Universitat Bremen, Germany); A. Mitasiunas (MitSoft, Vilnius, Lithuania); K. Seidel, I. Rada Cotera (IkerConsulting, Bilbao, Spain); Towards a Capability Maturity Model for Regional Innovation Strategies Details
41. S. Choi (IGI LLC, Clarksburg, MD, USA), K. Jung (LG Electronics Inc., Gyeonggi-do, South Korea), B. Kulvatunyou, K. Morris (NIST, Gaithersburg, MD, USA); An Analysis of Technologies and Standards for Designing Smart Manufacturing Systems Details
42. D. Morar, H-G. Kemper (University of Stuttgart, Germany); Requirements of Information Systems in Product Development and Production Regarding Additive Manufacturing - A Quantitative Exploration Details
43. S. Myung (Youngsan University, South Korea); Innovation Strategy for Engineering Plant Product Lifecycle Management based on Master Data Management, Project Management and Quality Management Details
44. P. Wahlund, P. Sjogren (Linkoping University, Sweden); Studie av informationsoverforing mellan konstruktion och produktion Details
45. A. Hefnawy, T. Elhariri, C. Cherifi (Universite Lumiere Lyon 2, France), A. Bouras (Qatar University, Qatar), J. Robert, S. Kubler (University of Luxembourg, Luxembourg), K. Framling (Aalto School of Science and Technology, Finland); Lifecycle Management in the Smart City Context: Smart Parking Use-Case Details
46. M. Miller (Georgia Institute of Technology, USA); A Decision Support Framework for Aircraft Conceptual Design in the Presence of Competition Details
47. J. Verdugo Cedeño (Lappeenranta University of Technology, Finland); Developing smart services by Internet of Things in manufacturing business Details
48. S. Kubler, J. Robert, Y. Le Traon (University of Luxembourg, Luxembourg), W. Derigent, A. Voisin (Universite de Lorraine, Vandoeuvre-les-Nancy, France); A state-of the-art survey & testbed of Fuzzy AHP (FAHP) applications Details
49. L. Horváth, I. Rudas (óbuda University, Budapest, Hungary); Integration of intelligent engineering activities using multifunctional space Details
50. V. Tarassov, A. Fedotova (Bauman Moscow State Technical University, Russia), B. Karabekov (Ministry of Education and Science of Kazakhstan, Almaty, Kazakhstan), R. Stark (Berlin University of Technology, Germany); Granular Meta-Ontology and Extended Allen's logic: Some Theoretical Background and Application to Intelligent Product Lifecycle Management Systems Details
51. C. Brecher, S. Storms, C. Ecker, M. Obdenbusch (RWTH Aachen University, Aachen, Germany); An Approach to Reduce Commissioning and Ramp-up time for Multi-variant Production in Automated Production Facilities Details
52. D. McKendry (BAE Systems Naval Ships, UK), R. Whitfield, A. Duffy (University of Strathclyde, UK); Business and information management architectures for delivering Product Lifecycle Management (PLM) in Engineer To Order (ETO) products Details
53. J. Golovatchev, P. Chatterjee, F. Kraus, R. Schüssl (Detecon International GmbH, Cologne, Germany); The Impact of the IoT on Product Development and Management Details
54. C. Gauffin, M. Jonsson (KTH, Stockholm, Sweden); Prototyp for identifiering av teknisk skuld inom Product Lifecycle Management Details
55. G. Kovács (Hungarian Academy of Sciences, Budapest, Hungary), A. Petunin (Ural Federal University, Ekaterinburg, Russia); An information technology view of manufacturing automation - product lifecycle management Details
56. A. Smirnov, N. Shilov (ITMO University, St. Petersburg, Russia), A. Oroszi, M. Sinko (Festo AG, Esslingen, Germany), T. Krebs (encoway GmbH, Bremen, Germany); Towards Life Cycle Management for Product and System Configurations: Required Improvements in Business Processes and Information Systems Details
57. J. Doyon-Roch (Universite de Sherbrooke, Canada); Social media to support collaboration in the product life cycle of SMEs Details
58. F. Santana (University of Canberra, Australia), D. Nagata, M. Cursino, S. Leal (Federal University of ABC, São Paulo, Brazil), C. Barberato (Australian National University, Canberra, Australia); Using BPMN-based Business Processes in Requirements Engineering: the Case Study of Sustainable Design Details
59. Y. Chen (Huazhong University of Science and Technology, Wuhan, China); Decision Making Based on Different Dimension Direction Details
60. G. Candia, G. Cruz, M. Rodríguez, L. Galindo (Benemerita Universidad Autónoma de Puebla, Mexico); Knowledge Based Engineering System (KBES) for Mechanic Design Activities Details
61. J. Bae (Keimyung University, Daegu, South Korea), S. Kim (2isys Co, Ltd, South Korea); A Study on Efficient Design and Construction Plan of Product Lifecycle Management Systems: Focused on PLM System of Korean D Company Details
62. Y. Bathla (óbuda University, Budapest, Hungary); Structured organization of Engineering Objects in the information content of PLM system Details
63. Y. Tai (National Pingtung University, Taiwan), Y. Ku (Fu Jen Catholic University, Taipei, Taiwan); Capabilities Driving Competitive Advantage in New Product Development: Coordination Capability, Absorptive Capability, and Information Technology Capability Details
64. J. Pokojski (Politechnika Warszawska, Poland), L. Woznicki, M. Debniak (Faurecia); Concept of system for support of FEA analysis processes Details
65. N. Grakova, I. Davydenko, A. Fedotova (Belarusian State University, Minsk, Belarus); The ontological approach to the creation of intellectual lifecycle management of technical systems Details
66. T. Luu (University of Economics, Ho Chi Minh City, Vietnam); How HR flexibility contributes to customer value co-creation behavior Details
67. E. Marilungo, M. Germani (Università Politecnica delle Marche, Ancona, Italy), E. Coscia, A. Quaglia (Holonix, Meda, Italy), M. Peruzzini (Università di Modena e Reggio Emilia, Modena, Italy); Open Innovation for Ideating and Designing New Product Service Systems Details
68. Y. Xiaoying, X. Yandong, S. Xin, M. Wei (Henan University of Science and Technology, Luoyang, China); Data Model of Bearings for CNC Machine Based on Lifecycle Details
69. B. Rizzon (Universite Grenoble Alpes, France); Aide à la decision pour les entreprises industrielles inscrites dans une demarche de developpement durable Details
70. J. Michaloski, T. Hedberg, H. Huang, T. Kramer (NIST, USA); End-to-End Quality Information Framework (QIF) Technology Survey Details
71. M. Schill (University of Reims Champagne Ardenne, France), D. Shaw (University of Glasgow, Scotland); Recycling today, sustainability tomorrow: Effects of psychological distance on behavioural practice Details
72. E. Marfo (Sunyani Polytechnic, Ghana), L. Chen, X. Hu, B. Ghansah (Jiangsu University, China); The Antecedents of Corporate Social Responsibility for Extractive Industries in the Governance Systems in Africa Details
73. S. Myung (Youngsan University, Yangsan, Korea); PLM System Implementation Methodology in Practice Details
74. M. Huertas Vera, M. Peralta álvarez, F. Aguayo González, A. Córdoba Roldán, E. González-Regalado Montero (Universidad de Sevilla, Spain), M. Marcos Bárcena, (Universidad de Cádiz, Spain); Sustainable PLM Architecture for Engineering Projects Details
75. A. Wolfson, D. Tavor (Sami Shamoon College of Engineering, Beer-Sheva, Israel); Servicizing as a Tool for Increasing the Sustainability of Product Life Cycles Details
76. M. Varl (Kolektor ETRA, Ljubljana, Slovenija), J. Duhovnik, J. Tavcar (University of Ljubljana, Slovenija); Towards a model for robust design and design process in one-of-a-kind production of large power transformers Details
77. A. Korpiniemi (Helsinki Metropolia University of Applied Sciences, Finland); Improving Data Management for Better Itemization Process : Towards the High Quality Data in Product Data Management Details
78. C. Eckl (Technische Universitat, Munich), M. Brandstatter, A. Pfouga, J. Stjepandic (PROSTEP AG, Germany); A Comparative View to Model-based Systems Engineering Technique in Space and Automotive Development Details
79. M. Allanic (Universite de Technologie de Compiegne, France); Gestion et visualisation de donnees heterogenes multidimensionnelles : application PLM à la neuroimagerie Details
80. N. Carutasu (University Politehnica of Bucharest, Romania), G. Carutasu (Romanian-American University, Bucharest, Romania ); Cloud ERP Implementation Details
81. J. Camba (University of Houston, TX, USA), M. Contero (Polytechnic University of Valencia, Spain), G. Salvador-Herranz (CEU Cardinal Herrera University, Valencia, Spain), R. Plumed (Jaume I University, Castellón de la Plana, Spain); Synchronous communication in PLM environments using annotated CAD models Details
82. A. Fedotova (Bauman Moscow State Technical University, Russia), I. Davydenko (Belarusian State University, Minsk, Belarus), A. Pfortner (Technische Universitat Berlin, Germany); Design Intelligent Lifecycle Management Systems Based on Applying of Semantic Technologies Details
83. M. Korhonen, K. Koykka (Lappeenranta University of Technology, Finland); Utilizing big data in sustainable business Details
84. J. Landahl, C. Levandowski, H. Johannesson, R. Soderberg, K. Warmefjord (Chalmers University of Technology, Gothenburg, Sweden), J. Carlson, J. Kressin (Fraunhofer Chalmers Centre, Gothenburg, Sweden), O. Isaksson, J. Vallhagen (GKN Aerospace Sweden AB, Trollhattan, Sweden); Using Product and Manufacturing System Platforms to Generate Producible Product Variants Details
85. E. Kankaanpaa (Vaasa University of Applied Sciences, Finland); Creation and maintenance of material replacement chain Details
86. A. Fedotova (Bauman Moscow State Technical University, Russia), I. Davydenko (Belarusian State University, Minsk, Belarus); The Application of Semantic Technologies to Design Intelligent Lifecycle Management Systems Details
87. R. Korhonen (Savonia University of Applied Sciences, Kuopio, Finland); Tuotteen elinkaarihallinnan kehittaminen : Cross Wrap Oy Details
88. V. Vainio, A. Pulkkinen (Tampere University of Technology, Finland); A Follow-up Case Study of the Relation of PLM Architecture, Maturity and Business Processes Details
89. H. Karkkainen (Tampere University of Technology, Finland), A. Silventoinen (Lappeenranta University of Technology, Finland); Different Approaches of the PLM Maturity Concept and Their Use Domains - Analysis of the State of the Art Details
90. F. Mahut, M. Bricogne, J. Daaboul, B. Eynard (Universite de Technologie de Compiegne, France); Servicization of Product Lifecycle Management: Towards Service Lifecycle Management Details
91. S. Teerasoponpong, A. Sopadang (Chiang Mai University, Thailand); Risk Probability Assessment Model Based on PLM's Perspective Using Modified Markov Process Details
92. M. Essamlali, A. Sekhari (University Lumiere Lyon 2, France), A. Bouras (Qatar University); PLM System Support for Collaborative Development of Wearable Meta-Products Using SBCE Details
93. M. Tajvidi, A. Karami (Bangor University, UK); Product Development Strategy Details
94. J. M. Hopf, J. Ovtcharova (Karlsruhe Institute of Technology, Germany); Deeper Insights into Product Development Through Data Visualization Techniques Details
95. J. Roch, E. Mosconi (Universite de Sherbrooke, Quebec, Canada); The Use of Social Media Tools in the Product Life Cycle Phases: A Systematic Literature Review Details
96. M. Mali (Lappeenranta University of Technology, Finland); Product change management in supply chain process of material handling equipment Details
97. G. Mick (Rovira i Virgili University, Spain); The role of revision in English-Spanish software localization Details
98. A. Hefnawy, C. Cherifi (Lyon 2 University, France), A. Bouras (Qatar University, Doha, Qatar) IoT for Smart City Services: Lifecycle Approach Details
99. G. Ferrari (Politecnico di Milano, Italy); A model to deploy enterprise search engines for big data handling in the product development process Details
100. L. Horváth and I. Rudas (óbuda University, Budapest, Hungary); Intellectual resource driven multipurpose virtual engineering environment Details
101. D. Schultz, M. Block, V. Viswanathan (Northwestern University, USA); Exploring a marketing concept: Does marketing encourage the filling of the 'empty self', ie, is marketing purchase therapy? Details
102. J. Laari (Lappeenranta University of Technology, Finland); Implementation of life cycle long configuration management Details
103. A. Abascal Blanco (Universidad de Sevilla, Spain); Plataforma de soporte a toma de decisiones frente a situaciones de emergencias en smart cities Details
104. C. Gheorghita, V. Gheorghita (Politehnica University of Bucharest, Romania); Eco-Audit and Environmental Impacts of Products Details
105. M. Olohan (University of Manchester, UK); Commercial Translation Details
106. S. Linnimaa (Lappeenranta University of Technology, Finland); Information Management in Aircraft Maintenance Details
107. G. Blondet, J. Le Duigou, N. Boudaoud (Universite de Technologie de Compiegne, France), F. Belkadi, A. Bernard (L'UNAM, France); Towards a knowledge based framework for numerical design of experiment optimization and management Details
108. B. Shyam, N. Ramachandra Gowda (Maharaja Institute of Technology, Mysore, India); A Comparative Study of Dynamic Nature of Product Life Cycle Stimulating Employee Life Cycle Details
109. T. Saksholm (Lappeenranta University of Technology, Finland); Improving the delivery and installation process in a global delivery project Details
110. S. Myung (Youngsan University, Yangsan, Korea); Master Data Management in PLM for the Enterprise Scope Details
111. S. Storbjerg, T. Brunoe, K. Nielsen (Aalborg University, Denmark); Towards an engineering change management maturity grid Details
112. E. Nabati (University of Bremen, Germany); Enhancing the Product Life Cycle Information Feedbacks Details
113. M. Simlová (University of West Bohemia, Pilsen, Czech Republic); The Knowledge Support of the Sales Phase of the Product Lifecycle Details
114. A. Tarara, M. Gheorghe (University Politehnica of Bucharest, Romania); Development of a product data engineering and management web based application Details
115. E. Sdrolia, G. Zarotiadis (Aristotle University of Thessaloniki, Greece); "Green Product": Where we are and where to go? Details
116. F. Tao, Y. Zuo, M. Zhang (Beihang University, PR China), Y. Wang (Northeastern University-Qinhuangdao, China), H. Yang (Guangdong University of Technology, Guangzhou, China); Internet of Things in product life-cycle energy management Details
117. S. Knuuttila (Lappeenranta University of Technology, Finland); Product Data Management related to Design for Manufacturing and Assembly in the Design Process of Power Solutions Details
118. A. Arshad, J. Wang, Q. Su (Xi'an Jiaotong University, China); Investigating The Mediating Role Of Service Innovation In Firm Performance: An Empirical Research Details
119. N. Sulakshana (University Of Madras, Chennai, India); How Lean Product Process may add Value to the Marketing Strategy of a Company Details
120. S. Laitinen, M. Huhtala, M. Lohtander, T. Kassi, J. Varis (Lappeenranta University of Technology, Finland); Product Knowledge and Lifecycle Management in Project-Based Manufacturing Details
121. A. Lantada (Universidad Politecnica de Madrid, Spain); Systematic Methodologies for the Development of Biomedical Microdevices Details
122. M. Messaadia, S. Mahdikhah, D. Baudry, A. Louis (CESI, Rouen, France), R. Evans, S. Wan, J. Gao, O. Owodunni, S. Shah, I. Essop, S. Keates, I. Cakebread (University of Greenwich, England); State of the Art Report, Interreg Ref: 4177 Details
123. M. Messaadia, S. Mahdikhah, D. Baudry, A. Louis (CESI, Rouen, France), R. Evans, S. Wan, J. Gao, O. Owodunni, S. Shah, I. Essop, S. Keates, I. Cakebread (University of Greenwich, England); Interreg Ref: 4177, WP3, Etat de l'Art Details
124. M. Messaadia, S. Mahdikhah, D. Baudry, A. Louis (CESI, Rouen, France), R. Evans, S. Wan, J. Gao, O. Owodunni, S. Shah, I. Essop, S. Keates, I. Cakebread (University of Greenwich, England); Interreg Ref: 4177, WP3, Benefits Part II Details
125. A. Bonou, S. Olsen (Technical University of Denmark), K. Skelton (Aalborg University, Denmark); Ecodesign framework for developing wind turbines Details
126. F. Silva, C. Gamarra, J. Leonardo (Instituto Mauá de Tecnologia, São Caetano do Sul, Brazil), A. Araujo (Universidade do Estado do Rio de Janeiro, Resende, Brazil); Product lifecycle management, digital factory and virtual commissioning: Analysis of these concepts as a new tool of lean thinking Details
127. A. Rashid (National University of Science & Technology, Rawalpindi, Pakistan), B. Tjahjono (Cranfield University, UK); Achieving manufacturing excellence through the integration of enterprise systems and simulation Details
128. M. Messaadia, D. Baudry, A. Louis, S. Mahdikhah, M. Sahnoun, B. Mazari (CESI/IRISE, France), R. Evans, J. Gao (University of Greenwich, UK) T. Paquet (University of Rouen, France); PLM adoption in SMEs context Details
129. K. van Schaik (University of Twente, The Netherlands); A Servitization Framework for Corporate Companies Details
130. J. Munir (KTH, Stockholm, Sweden); Information Integration Using a Linked Data Approach Details
131. N. Carutasu (University Politehnica of Bucharest, Romania), G. Carutasu (Romanian-American University, Romania) ; ERP Implementation Process and Documents Details
132. J. Seminsky, V. Rudy (Technical University of Kosice, Slovak Republic); Optimization of Manufacturing Processes on the Platform of PLM Systems Details
133. H. Karkkainen, A. Silventoinen (Tampere University of Technology, Finland); What is Product Lifecycle Management (PLM) Maturity? Analysis of Current PLM Maturity Models Details
134. G. Bruno, T. Taurino, A. Villa (Politecnico di Torino, Italy); An approach to support SMEs in manufacturing knowledge organization Details
135. N. Littell (Ohio University, USA); Components of Product Lifecycle Management and Their Application within Academia and Product Centric Manufacturing Enterprises Details
136. M. Khan, N. Sheth (JJT University, Rajasthan, India); Promotion and Shifting Position of Advertising Details
137. O. Yildiz (G-SCOP, Grenoble, France); Atelier de conception pour l'evolution des systemes PLM : une approche d'ingenierie dirigee par les modeles Details
138. R. Poluha (SAP France, Paris, France); The Quintessence of Supply Chain Management: What You Really Need to Know to Manage Your Processes in Procurement, Manufacturing, Warehousing and Logistics Details

1. G. Shirale, R. Buktar (Sardar Patel College of Engineering, Mumbai, India); PLM Implementation Effects in Heavy Engineering Industry: A Case Study Details
2. P. Hexley, V. Smith, S. Wall (University of Nebraska, Omaha, Nebraska, USA); Operational Changes in a Shared Resource Laboratory with the Use of a Product Lifecycle Management Approach: A Case Study Details
3. V. Simoes (ecole Centrale de Nantes, France); Generation de Trajectoires "On-line" pour Machine à Commande Numerique Ouverte dans un Environnement de Programmation Avancee STEP-NC Details
4. L. Horváth, I. Rudas (óbuda University, Budapest, Hungary); Request Driven Generation of RFLP Elements at Product Definition Details
5. N. Hartman, C. Kenley (Purdue University, USA); Product Lifecycle Management: The Salvation of Systems Engineering Details
6. J. Badurek (Gdansk University of Technology, Poland); Przedsiebiorstwo informacyjne : systemy produkcyjne nowej generacji Details
7. L. Horvath, I. Rudas, M. Takacs (óbuda University, Budapest, Hungary); Content representation structure for product system modeling Details
8. B. Schindlbeck (University of Passau, Germany); Verbreitung und Durchdringung von Business-to-Business Technologien. Interaktive Formulare als alternative Technologie zur Unterstützung des Informationsaustauschs zwischen Unternehmen Details
9. J. Pulakka (Tampere University of Applied Sciences, Finland); Viivakoodikamerat osana renkaan jaljitettavyytta Details
10. A. Serester, G. Hidas, G. Szogi, P. Galambos (óbuda University, Budapest, Hungary); Testing and verification through virtual product models: A survey and look ahead Details
11. S. Andrade, T. Monteiro, H. Gaspar (Aalesund University College, Norway); Product Lifecycle Management in ship design: From concept to decommission in a virtual environment Details
12. J. Gati, F. Hegyesi, K. Nemethy, G. Kartyas (Obuda University, Budapest, Hungary); New education challenges in engineering course programs Details
13. O. Borgia, N. Fanciullacci, S. Franchi, M. Tucci (University of Florence, Italy); The use of product information along its entire lifecycle: a practical framework for continuous development Details
14. F. Blaga, A-V Pele, I. Stanasel, T. Buidos, V. Hule (University of Oradea, Romania); Using Teamcenter engineering software for a successive punching tool lifecycle management Details
15. I. Ilyin, O. Iliashenko, K. Makov, K. Frolov (St. Petersburg State Polytechnical University, Russia); Developing a reference model of the information system architecture of high-tech enterprises Details
16. J. Conlon (University of Huddersfield, UK); Embedding Product Lifecycle Management (PLM) in Higher Education: A Case Study in Fashion Business Details
17. G. Pavani (Instituto Federal do Rio Grande do Sul, Farroupilha, Brasil), S. Pavani (Universidade Federal de Santa Maria, Brasil), C. Ferreira (Universidade Federal do Rio Grande do Sul, Porto Alegre, Brasil); Carbon Fiber Recycling of Carbon Fiber Reinforced Polymeric Reservoirs for Compressed Natural Gas Details
18. M. Giddaluru, J. Gao, R. Bhatti, S. Shah (University of Greenwich, UK); Requirements analysis in the implementation of integrated PLM, ERP and CAD systems Details
19. M Jacob, J Erasmus (Council for Scientific and Industrial Research, Pretoria, South Africa); The drivers and factors influencing PLM adoption and selection Details
20. M. Imran, R. Young (Loughborough University, UK); Reference ontologies for interoperability across multiple assembly systems Details
21. R. Mozzillo (Università degli Studi di Napoli Federico II, Italy); Virtual engineering tools supporting mechanical systems design and lifecycle management Details
22. J Erasmus, M Jacob, L Erasmus (Council for Scientific and Industrial Research, Pretoria, South Africa); The need for PLM in South Africa Details
23. H. Li, G. Luo, S. Mi (Zhengzhou University, China), Y. Ji (Zhejiang University, Hangzhou, China); A modular structure data modeling method for generalized products Details
24. T. Kauppinen (Savonia University of Applied Sciences, Finland); Product Structure Management in After-sales Operations Details
25. C. Eckl, M. Brandstatter, (Technische Universitat München, Germany), J. Stjepandic (PROSTEP AG, Germany); Using the "Model-based Systems Engineering" Technique for Multidisciplinary System Development Details
26. M. Cantamessa, F. Montagna (Politecnico di Torino, Italy); The Product Development Process Details
27. S. Leino (Tampere University of Technology, Finland); Reframing the value of virtual prototyping Details
28. J. Stjepandic (PROSTEP AG, Germany), W. Verhagen (Technical University of Delft, The Netherlands), N. Wognum (Wageningen University, The Netherlands); CE Challenges - Work to Do Details
29. I. Salo (Helsinki Metropolia University of Applied Sciences, Finland); Fastener Data Analysis Details
30. J. Tiedeken, M. Reichert (Ulm University, Germany), T. Bauer (University of Applied Sciences, Neu-Ulm), J. Herbst (Daimler AG, Boblingen, Germany); Determining the Quality of Product Data Integration Details
31. T. Vosgien (Ecole Centrale Paris, France); Model-based system engineering enabling design-analysis data integration in digital design environments : application to collaborative aeronautics simulation-based design process and turbojet integration studies Details
32. C. Groger (University of Stuttgart, Germany); Advanced Manufacturing Analytics: Datengetriebene Optimierung von Fertigungsprozessen Details
33. G. Blondet, J. Le Duigou, N. Boudaoud, B. Eynard (Universite de Technologie de Compiegne, France); Simulation data management for adaptive design of experiments: A literature review Details
34. L. Roa Castro (Institut de Recherche Technologique IRT SystemX, Palaiseau, France), J. Stal-Le Cardinal (Ecole Centrale, Paris); An overview of collaborative simulation on design process Details
35. D. Bohnke, (Technical University of Hamburg, Germany); A Multi-Fidelity Workflow to Derive Physics-Based Conceptual Design Methods Details
36. A. Arshad, Q. Su (Xi'an Jiaotong University, China); Interlinking Service Delivery Innovation And Service Quality: A Conceptual Framework Details
37. G. Bruno, T. Taurino, A. Villa (Politecnico di Torino, Italy); MAKO: MAnufacturing Knowledge Organization system to support SME Details
38. L. Horvath, J. Fodor, I. Rudas (óbuda University, Budapest, Hungary); Manufacturing Aspect of the IBCA Structure for Active Knowledge Content Representation in Product Model Details
39. J. Johnson (Brigham Young University, Provo, Utah); Integrating Synchronous Collaborative Applications with Product Lifecycle Management Workflows Details
40. F. Karakoyun (EPFL, Switzerland); A Methodology for Holistic Lifecycle Approach as Decision Support System for Closed-loop Lifecycle Management Details
41. I. Westphal, K-D Thoben (University of Bremen, Germany), M. Freitag (Fraunhofer IAO, Stuttgart, Germany); Visualization of Interactions Between Product and Service Lifecycle Management Details
42. J. Erasmus, L. Erasmus (CSIR, South Africa), J-H. Pretorius (University of Johannesburg, South Africa); Towards unification of product and enterprise system descriptions Details
43. D. Knoll, V. Johnsson (Halmstad University, Sweden); The Lead User Concept: How High Technology Firms Interact with the Lead User in the Innovation Process Details
44. A. Bencsik, K. Nemethy, G. Kartyas, F. Hegyesi (óbuda University, Budapest, Hungary); Effects of new engineering paradigm on university education programs Details
45. A. Alfaro (Universidad de Chile); Modelo de distribución de productos de vestuario femenino para un retailer Details
46. L. Horvath, I. Rudas (óbuda University, Budapest, Hungary); High level abstraction for product concept definition in virtual engineering Details
47. A. Silisteanu (University Politehnica of Bucharest, Romania); The Designing Process for a HMES Used for the Management of Radiopharmaceuticals Production Details
48. A. Simon, M. Casadesus (University of Girona, Spain), L. Yaya (International University of Catalonia, Barcelona, Spain), S. Karapetrovic (University of Alberta, Canada); Can integration difficulties affect innovation and satisfaction? Details
49. M. Varl (Kolektor ETRA, Ljubljana, Slovenia), J. Tavcar, J. Duhovnik (University of Ljubljana, Ljubljana, Slovenia); Enhancing Robustness of Design Process in Individual Type of Production Details
50. D. Bergsjo (Chalmers University of Technology, Gothenburg, Sweden); The PLM user perspective: identification of user needs and their organisational impacts Details
51. R. Pinquie, P. Veron (Arts et Metiers ParisTech, Aix-en-Provence, France), L. Rivest (École de technologie superieure, Montreal, Canada), F. Segonds (Arts et Metiers ParisTech, Paris, France); An illustrated glossary of ambiguous PLM terms used in discrete manufacturing Details
52. J. Garcia (University of Seville, Spain); Una propuesta para el uso del paradigma guiado por modelos (MDE) para la definición y ejecución de procesos de negocio Details
53. Y. Jang (McGill University, Montreal, Canada) ; Convenience matters: A qualitative study on the impact of use of social media and collaboration technologies on learning experience and performance in higher education Details
54. G. Bruno, D. Antonelli, A. Villa (Politecnico di Torino, Italy); A Reference Ontology to Support Product Lifecycle Management Details
55. M. Edin, E. õstberg (Uppsala University, Sweden); Clarifying Product Management - A Study of the Sensemaking Outcome in a Management Practice Details
56. J. Wu, T. Chang (National Sun Yat-Sen University, Taiwan), S. Shin (National Taitung University, Taiwan), A. Gupta (University of Minnesota, Minneapolis, USA), M. Hsu (National Chi Nan University, Taiwan); Ex-Ante PLM Misfit Analysis Methodology: A Cognitive Fit Approach Details
57. M. Hansson, M. Hognesius (Uppsala University, Sweden); Extending the Metaphor: Technical Debt in General Product Development Details
58. D. Siedlak, P. Schlais, O. Pinon, D. Mavris (Georgia Institute of Technology, Atlanta, GA, USA); Supporting Affordability-Based Design Decisions in the Presence of Demand Variability Details
59. A. Mackelprang (Georgia Southern University, Statesboro, GA, USA), M. Habermann (Ohio University, Athens, OH, USA), M. Swink (Texas Christian University, Fort Worth, TX, USA); How Firm Innovativeness and Unexpected Product Reliability Failures Affect Profitability Details
60. J. Kurki (Jamk University of Applied Sciences, Jyvaskyla, Finland); The Customer-Oriented Approach of the Products in Viaporin Deli & Cafe Details
61. C. Li, Y. Lu, Z. Li (Nan Tien Institute, Unanderra, Australia); Uniqueness in Mobile Teaching Environment Design Methodology Details
62. O. Guschinskaya (ecole Nationale Superieure des Mines, Saint-etienne, France); Decision Aid Tools for the Preliminary Design of Machining Systems Equipped with Multi-Spindle Heads Details
63. W. Li (University of New South Wales, Australia); Efficiency of Manufacturing Processes: Energy and Ecological Perspectives Details
64. S. Nof, M. Moghaddam (Purdue University, USA), J. Ceroni (Catholic University of Valparaiso, Chile), W. Jeong (Korea Railroad Research Institute, Uiwang, Republic of Korea); e-Work in Product and Service Development Details
65. E. Vezzetti, M. Violante, F. Marcolin (Politecnico di Torino, Italy); A benchmarking framework for product lifecycle management (PLM) maturity models Details
66. S. Myung (Youngsan University, Republic of Korea) ; Implementation Process of Enterprise PLM System Details
67. K. Larsson, F. Vidlund (KTH Stockholm, Sweden) ; Product Data Management in New Product Introduction - A Qualitative Case Study of Ericsson, PIM RBS Kista, Sweden Details
68. A. Fedotova (Bauman MSTU, Moscow, Russia), I. Davydenko (Belarusian State University, Minsk, Belarus) ; Ontological Modeling of Maintenance Details
69. H. Naduthodi (Anna University, Chennai, India) ; A product data management framework for the design and development of headlamps for passenger cars Details
70. A. Bessarabov, A. Kvasyuk, T. Stepanova, E. Sudarikova, A. Vendilo (R&D Centre "Fine Chemicals", Moscow, Russian Federation) ; Development of the CALS-Technology of Drying-Agglomeration Process in Production of Biologically Active Additives of the New Generation Details
71. H. Oja (University of Oulu, Finland) ; Master's Thesis Details
72. S. Wiesner, I. Westphal, K-D Thoben (University of Bremen, Germany), M. Freitag (Fraunhofer IAO, Stuttgart, Germany) ; Interactions between Service and Product Lifecycle Management Details
73. G. Schuh, G. Gudergan, B. Feige, A. Buschmeyer, D. Krechting (RWTH Aachen University, Germany) ; Business Transformation in the Manufacturing Industry - How Information Acquisition, Analysis, Usage and Distribution Affects the Success of Lifecycle-Product-Service-Systems Details
74. A. Baykasoglu, I. Golcük, D. Akyol (Dokuz Eylül University, Izmir, Turkey) ; A fuzzy multiple-attribute decision making model to evaluate new product pricing strategies Details
75. M. Giddaluru, J. Gao, R Bhatti (University of Greenwich, UK) ; A Modular Product Structure Based Methodology for Seamless Information Flow in PLM System Implementation Details
76. J. Li, F. Tao, Y. Cheng, L. Zhao (Beihang University, Beijing, China) ; Big Data in product lifecycle management Details
77. M. Kadenic (Aarhus University, Denmark) ; Socioeconomic value creation and the role of local participation in large-scale mining projects in the Arctic Details
78. L. Horváth, I. Rudas (óbuda University, Budapest, Hungary) ; Intelligent Content for Product Definition in RFLP Structure Details
79. J. Vasara, J Kivisto-Rahnasto (Tampere University, Finland) ; A qualitative examination of safety-related compliance challenges for global manufacturing Details
80. M. David, F. Rowe (University of Nantes, France) ; Le management des systemes PLM (product lifecycle management): Un agenda de recherche Details
81. T. Wuest, K. Hribernik, K-D. Thoben (BIBA, Bremen, Germany) ; Accessing servitisation potential of PLM data by applying the product avatar concept Details
82. L. Fish (Canisius College, Buffalo, USA) ; Managerial Best Practices to Promote Sustainable Supply Chain Management & New Product Development Details
83. T. Wuest (University of Bremen, Germany) ; Current Approaches with a Focus on Holistic Information Management in Manufacturing Details
84. K. Kania (University of Katowice, Poland) ; Improving the Management of Business Processes in an Organisation using Maturity Models and ICT Details
85. Y. Zheng (Hong Kong Polytechnic University, China) ; A method of interpreting Chinese traditional everyday artefacts in the context of sustainable product design Details
86. M. Lederer, S. Gerber (Universitat Erlangen-Nürnberg, Germany) ; Ein Empfehlungssystem für Prozessoptimierungen im Product Lifecycle Management als Ideengeber und Entscheidungshilfe für mittlere Manager Details
87. L. E. Redding, R. Roy, J. Menhen (Cranfield University, UK), C. J. Hockley (Defence Academy, UK) ; The Role of Maintenance, Repair, and Overhaul (MRO) Knowledge in Facilitating Service Led Design: A Nozzle Guide Vane Case Study Details
88. V. Nappi, H. Rozenfeld (University of São Paulo, Brazil) ; The Incorporation of Sustainability Indicators into a Performance Measurement System Details
89. P. Trebuna, M. Kliment, J. Markovic (Technical University of Kosice, Slovakia) ; PLM Systems, their Use and Application Software Portfolio Tecnomatix in Optimizing Production in Business Practice Details
90. L. Horváth and I. Rudas (óbuda University, Hungary) ; Systems Engineering in Product Definition Details
91. A. Koukias, D. Nadoveza, D. Kiritsis (EPFL, Switzerland); An Ontology-based Approach for Modelling Technical Documentation Towards Ensuring Asset Optimisation Details
92. Alberto Salido Lopez, Carmelo Del Valle, María Jose Escalona (University of Seville, Spain), Vivian Lee, Masatomo Goto (Fujitsu, England); Patient Lifecycle Management: An Approach for Clinical Processes Details
93. D. Bellm (University of St.Gallen, Switzerland); Operational Excellence in the Pharmaceutical Industry - An Architecture for Emerging Markets Details
94. H. Zhang, A. Bouras, Y. Ouzrout, A. Sekhari (University of Lyon, France); Fuzzy multi-criteria lifecycle system maturity decision making based on an integrated Fuzzy AHP and VIKOR methodology Details
95. M. Lewandowski, S. Oelker, R. Garcia Sanchez, K.-D. Thoben (University of Bremen, Germany); Closed-loop Product Lifecycle Management for Offshore Wind Turbines by Utilising Enhanced Maintenance Concepts Details
96. S. Kirk and J. Chen (KTH Stockholm, Sweden); PLM Systems in Smaller Scale Manufacturing Companies - Suitability of PLM Systems and Anchoring via Change Management Details
97. F. Karakoyun and D. Kiritsis (EPFL, Switzerland); Closed-loop Lifecycle Management of Automotive Components: Holistic Life Cycle Approach as Decision Support System Details
98. L. Horváth and I. Rudas (óbuda University, Budapest, Hungary); New Method for Generation of RFLP Structure Elements in PLM Model Details
99. A. Rauzy (ecole Centrale, France); Model-Based Safety Assessment: Rational and trends Details
100. L. Lammer and M. Theiss (Prostep AG, Germany); Product Lifecycle Management Details
101. System Lifecycle Management: Initial Approach for a Sustainable Product Development Process Based on Methods of Model Based Systems Engineering. Martin Eigner, Thomas Dickopf, Hristo Apostolov, Patrick Schaefer, Karl-Gerhard Faisst, Alexander Kessler (University of Kaiserslautern, Germany)
102. Integrating Eco-design and PLM in the Aviation Completion Industry: A Case Study. Natalia Moreira, Yi Wang (University of Manchester, UK), Daoud Ait-Kadi (Universite Laval, Canada), Darli Rodrigues Vieira, Alejandro Romero (Universite du Quebec, Canada), Luis Antonio de Santa-Eulalia (Universite de Sherbrooke, Canada)
103. Digitization of Business Processes and Tecnomatix as a Comprehensive Package Instrument for the Creation of the Digital Factory. Marek Kliment, Peter Trebuna (Technical University of Kosice, Slovakia), Jaromir Markovic (Slovak Legal Metrology, Slovakia)
104. Risk Assessment of Logistics Project Implementation in the Initial Stage. A. I. Kuzmich
105. Product Data Management - Defining the Used Terms. Merja Huhtala, Mika Lohtander, Juha Varis (Lappeenranta University of Technology, Finland)
106. Decomposition Analysis Resolution Process (DAR) of Systems Engineering Applied to Development of Countermeasure on Leakage of Engine Head-Gasket. Satoshi Ohkawa, Hidekazu Nishimura and Yoshiaki Ohkami (Keio University, Japan)
107. BIM and PLM: Comparing and Learning from Changes to Professional Practice Across Sectors. Julie Jupp (University of Technology, Sydney, Australia) and Madhav Nepal (Queensland University of Technology, Australia)
108. Similar Concepts, Distinct Solutions, Common Problems: Learning from PLM and BIM Deployment. J. R. Jupp (University of Technology, Sydney, Australia) and Vishal Singh (Aalto University, Finland)
109. Comparison Framework for PLM Maturity Models. Tom Stentzel, Masoud Niknam, Jivka Ovtcharova (Karlsruhe Institute for Technology, Germany)
110. Intelligent Information Technologies to Enable Next Generation PLM. Rainer Stark, Thomas Damerau, Haygazun Hayka, Sebastian Neumeyer, Robert Woll (Fraunhofer IPK, Germany)
111. PLM Maturity Evaluation and Prediction Based on a Maturity Assessment and Fuzzy Sets Theory. Haiqing Zhang, Aicha Sekhari, Yacine Ouzrout, Abdelaziz Bouras (University Lumiere Lyon 2, France)
112. Product Lifecycle Management in Education: Key to Innovation in Engineering and Technology. Priyanka Gandhi
113. An Exploration into Measurement Consistency on Coordinate Measuring Machines. Per Saunders, Paul Maropoulos (University of Bath, UK), Alan Wilson (National Physical Laboratory), Nick Orchard, Neil Tatman (Rolls-Royce plc, UK)
114. Holistic Lifecycle Approach for Lightweight Automotive Components. Fatih Karakoyun, Dimitris Kiritsis (EPFL, Switzerland) and Kristian Martinsen (SINTEF, Norway)
115. Optimisation and Elimination of Bottlenecks in the Production Process of a Selected Company. Peter Trebuna, Marek Kliment, Milan Filo (Technical University of Kosice, Slovakia)

1. L. Horvath, I. Rudas; New Method for Intellectual Content Driven Generic Product Model Generation Details
2. S. D'Amico, L. Giustiniano, L. Pirolo, M. Nenni; Product Lifecycle Management and Compliance with International Standards: a Case Study Analysis in the Footwear Industry Details
3. M. Eigner, C. Muggeo, T. Dickopf, K-G. Faisst; An Approach for a Model Based Development Process of Cybertronic Systems Details
4. D. Adler; Scope Change, Flexibility and the Management of Projects Details
5. H. Bruun, N. Mortensen, U. Harlou, M. Worosch, M. Proschowsky; PLM System Support for Modular Product Development Details
6. S. Kubler, K. Framling; P2P Data Synchronization for Product Lifecycle Management Details
7. S. Kubler, K. Framling; CaPLIM: the next generation of Product Lifecycle Information Management? Details
8. S. Mahdikhah, M. Messaadia, D. Baudry; A Business Process Modelling Approach to Improve OEM and Supplier Collaboration Details
9. E.A.S. Fielding, J.R. McCardle, B. Eynard, N. Hartman, A. Fraser; Product lifecycle management in design and engineering education: International perspectives Details
10. H. Gmelin, S. Seuring; Determinants of a sustainable new product development Details
11. V. Nappi, H. Rozenfeld; Sustainability Performance Indicators for Product Lifecycle Management Details
12. Xu-Wei Pan et al.; An information integration modelling architecture for product family life cycle in mass customisation Details
13. J. Vargas-Orellana; A Distributed Approach for Global Product Lifecycle Management Details
14. L. Horvath, I.J. Rudas; Elevated level design intent and behavior driven feature definition for product modeling Details
15. Y. Zhang, L Zhang; Organizing Complex Engineering Operations throughout the Lifecycle: A Service-Centred View and Case Studies Details
16. Y. Liu; Workflow Engine-driven Universal Product Lifecycle Management System Framework for Small and Medium-Size Enterprises Details
17. M. Franke et al.; Semantic Web Service Wrappers as a Foundation for Interoperability in Closed-loop Product Lifecycle Management Details
18. H. Zhang et al.; Sustainability Consideration within Product Lifecycle Management through Maturity Models Analysis Details
19. C. Levandowski; Platform Lifecycle Support using Set-Based Concurrent Engineering Details
20. S. Gallasch; The Anticompetitive Misuse of Intellectual Property Rights in the European Pharmaceutical Sector Details
21. L. Horvath et al.; Systems Engineering Methods for Multidisciplinary Product Definition Details
22. S. Kubler et al.; A Standardized Approach to deal with Firewall and Mobility Policies in the IoT Details
23. S. Frolova; The Role of Advertising in Promoting a Product Details
24. M. Huhtala et al.; Product Data Management Systems as a Tool in Engineering Change Management Details
25. V. Fortineau; Contribution à une modelisation ontologique des informations tout au long du cycle de vie du produit Details
26. V. Hernandez; Integración del diseño para remanufacturar en el ecodiseño Details
27. A. Parviainen; Product Portfolio Management Requirements for Product Data Management Details
28. K. Hanninen; Rapid Productisation Process: Managing an Unexpected Product Increment Details
29. S. Cha, K. Park, C. Song, K. Kim, C. Ryu, S. Lee; Interval Disaggregate: A New Operator for Business Planning Details
30. N. Doumit; etude d'integration fonctionnelle du cycle de developpement des produits et des communautes de pratique virtuelles Details
31. S. Dienst et al; Development of a Knowledge-based Feedback Assistance System of Product Use Information for Product Improvement Details
32. A. Ebrahimi et al; Managing Product and Production Variety - A Language Workbench Approach Details
33. E. Tekin; A Method for Traceability and "As-built Product Structure" in Aerospace Industry Details
34. K. Jansson et al; Services supporting Collaborative Alignment of Engineering Networks Details
35. A. Qureshi et al; Stages in Product Lifecycle: Trans-disciplinary Design Context Details
36. M. Paavel et al; Optimizing PLM Implementation from Vision to Real Implementation in Estonian SMEs Details
37. S. Karadgi; A Reference Architecture for Real-Time Performance Measurement Details
38. H. Zhang et al; A PLM Components Monitoring Framework for SMEs based on a PLM Maturity Model and FAHP Methodology Details
39. W. Han; Modelling for Data Management & Exchange in Concurrent Engineering - A Case Study of Civil Aircraft Assembly Line Details
40. A. Salido et al; Tests Management in CALIPSOneo: A MDE Solution Details
41. E. Poirier et al; Dimensions of Interoperability in the AEC Industry Details
42. S. Kubler et al; Group fuzzy AHP approach to embed relevant data on "communicating material" Details
43. V. Tarassov et al; Lifecycle Ontologies for Complex Technical Systems Details
44. H Gmelin et al; Achieving sustainable new product development by integrating product lifecycle management capabilities Details
45. P Witherell et al; Towards the Synthesis of Product Knowledge Across the Lifecycle Details
46. A Boulogne et al; La Documentation Technique - Les Fondamentaux Details
47. A Sharon et al; A Project-Product Model-Based Approach to Planning Work Breakdown Structures of Complex System Projects Details
48. R Mejia-Gutierrez et al; Product Lifecycle Management (PLM) as a Strategy for Project Structuring and Coordination Details
49. JA Garcia-Garcia et al; NDT-Suite: A Methodological Tool Solution in the Model-Driven Engineering Paradigm Details
50. I Lahoud; Un systeme multi-agents pour la gestion des connaissances heterogenes et distribuees Details
51. HM Shih; Migrating product structure bill of materials Excel files to STEP PDM implementation Details
52. M. Khalfallah, N. Figay, C. Da Silva, P. Ghodous; A cloud-based platform to ensure interoperability in aerospace industry Details
53. L. Horvath; Towards Knowledge Driven Adaptive Product Representations Details
54. G. Ducellier, P. Yvars, B. Eynard; Managing design change order in a PLM platform using a CSP approach Details
55. C. Martin; Critical Success Factors for New Product Development in Hard Disc Drive Manufacturer in Malaysia Details
56. M. Elhuni, M. Ahmad; Investigating the total quality elements based on Deming management model in oil industry in Libya - an empirical study Details
57. D. Tang; Evaluation of EDA tools for electronic development and a study of PLM for future development businesses Details
58. A. Corallo et al.; Reviewing Product Lifecycle Management Models For Complex Sectors: A Proposal Details
59. J. Block, A. Ahmadi, T. Tyrberg, P. Soderholm; Part-out-based spares provisioning management: A military aviation maintenance case study Details
60. S. Venugopalan, L. Ganesh, L. Sai; Perspectives of Users and Service Providers on Deployment Maturity Assessment: A Study of Product Lifecycle Management Systems Details